Magnets

 HCS Weight Set for Viper V1 Viper-Jet Cars

One set of front and rear weights.  Specifically made to fit Viper V1™ cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Front buttons are CNC brass, magnet box weights are molded copper.  Car for example only and not included.

 HCS AMG Front Weight Set for Viper V1 Viper-Jet Cars

One set of front weights.  Specifically made to fit Viper V1™ cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Front buttons are CNC brass. Car for example only and not included.

Pro Light Weight Level 25 Cobalt Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal light weight design Level 25 Cobalt  motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of restricted open road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 35 Spinner and have a good power supply and controller.   

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Pro-10 Motor Magnets for Aurora Magna-Traction, AW X-Traction & 4-Gear Cars

You get One pair of magnets.  These are the real deal precision comression molded Level 10 magnets.  Specifically made to fit Aurora Magna-Traction, Auto World X-Traction and 4-Gear chassis.  These are way stronger than factory magnets so a good low ohm armature and better hubs and tires would be indicated.   Chassis for display and not included. 

Pro-10 Motor Magnets for Aurora T-Jet, AW Thunderjet, T-Dash Cars

You get One pair of magnets.  These are the real deal precision comression molded Level 10 magnets.  Specifically made to fit Aurora T-jet, Auto World Thunderjet and T-Dash chassis.  These are way stronger than factory magnets so a good low ohm armature and better hubs and tires would be indicated.   Chassis for display and not included. 

 HCS AMG Rear Weight Set for Viper V1 Viper-Jet and BSRT G3-R Cars

One set of rear weights.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Weights are molded copper.  Car for example only and not included.

Viper Pro-4™ Motor/Tractioon Magnets for Life Like "M"Cars

You get ONE pair of magnets.  These are the real deal Level 4 compression molded magnets. Designed for a 'drop-in' fit for Life Like "M" cars.  Magnets are design to allow better handling due to increased magnetism to the rails over the stock factory ceramic magnets.   Make your stock M car more FUN !!

Life Like "T" Car - AMG Pro-52™ Traction Magnets

Tomy Mega-G - AMG Pro-52™ Traction Magnets

Tomy Mega-G+ Cars - AMG Pro-42™ Traction Magnets

HCS AMG Pro-48™ Traction Magnets for Tomy SRT and MEGA-G!

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.
 

Pro-10™ Traction Magnet Bar for Tomy Turbo Cars

One magnet bar.  These are Level 10 traction magnet bars specifically made to fit Tomy Turbo cars.  A great upgrade from the weak factyory ceramic traction magnet bar.   Add a set of quality after-market slip-on tires and Turbo can be fun to run !!!

HCS AMG Ceramic Traction Magnets for Tyco 440x2 Chassis

TEN pairs of  magnets.  North / South oriented so they can be installed in either high downforce or low downforce (motor mode).  These are 'drop-in' for any Tyco 440x2 chassis or Mattel HPx2. 

Note: ceramic magnets are not as strong as level 4 compression molded magnets.  These are good 'all ceramic' magnet classes.  Also they work well when running proper sized silicone sponge rear tires.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Pro-42™ Tyco 440x2 and Mattel HPx2 Cars

One pair of magnets. These magnets replace standard factory Tyco 440x2 traction magnets.   They are North/South oriented so they can be installed in either Hi or Low downforce.  Magnets are marked "L" and "R" for Hi-Downforce installation. 

Magnet holders are NOS factory parts used in the famous Japanese Tyco 440x2 "Super Circuit" cars.  Those original parts used cobalt magnets inserts.  We've upped the game and fitted the holders with Level 42 neo magnets.  These magnets have more applied downforce than our level 10 polymer magnets.

Recommended armatures would be the AMG 3.5 ohm or 2.8 ohm for Tyco/Wizzard. Standard factory ceramic motor magnets work, but Pro-4 with a 3.5 or Pro-10 with a 2.8 may be better.

Light weight design means superior handling performance in corners.  You carry less mass than traditional ceramic or polymer magnet designs.  Magnet holders are slightly wider on one side.  Install that side facing out of the chassis. Use a firm rear tire like Super Tires "B" or Super Tires Urethane for Tyco. 

Limited availability for these NOS holders.  These magnets will NOT work with Mattel HPx2 rear bulkheads.

  Viper Pro-10™ Traction Magnets for Tyco 440x2 Chassis

One pair of  magnets.  North / South oriented so they can be installed in either high downforce or low downforce (motor mode).  These are 'drop-in' for any Tyco 440x2 chassis or Mattel HPx2.  Magnets are marked red for the right side and white for the left side.  Installing them like this will be low downforce. 

These compression molded magnets are engineered for better fit and performance.  These magnets bring out the best in most factory stock cars. 

Viper Pro-4™ Motor Magnets for Tyco 440x2 and Mattel HPx2 Cars

One pair of magnets.  These are the real deal Level 4 compression molded motor magnets. Designed for a 'drop-in' fit for Tyco 440 and Mattel HPx2 cars.  Magnets have a 'hang down' flush fit design to allow better handling due to increased magnetism to the rails. 

Use with lower ohm armatures and Pro-8™ or Pro-10™ traction magnets for best setup.    

Viper Pro-4™ Motor Magnets for Tyco 440x2 and Mattel HPx2 Cars

One pair of magnets.  Level 8 grade compression molded magnets are 'Drop In Fit' for Tyco 440 based cars.  You get better performance in two ways: the magnets are very consistent and do not need to be gauss meter matched.  Secondly the magnets are flush with the bottom of the chassis to allow more magnetic attraction to the rails.  This helps keep the front end planted for better handling. 

Typical use with these motor magnets are in any class of car formula that calls for polymer magnets - generally factory based 3.5 ohm and lower armatures.

Ready to run car for example only.

Note: Cars built with Pro-8 Motor magnets and Pro-8 & Pro-10 Traction magnets will need to use the Tyco black stiff chassis. The gray nylon chassis will be too flexible. You will need to use better quality rear axle sets with pro quality gears from Viper, BSRT, Wizzard, or Slottech.  The Tyco factory gears will be too soft and fail quickly. 

Viper Pro-8™ Traction Magnets for Tyco 440x2 Chassis

One pair of  magnets.  North / South oriented so they can be installed in either high downforce or low downforce (motor mode).  These are 'drop-in' for any Tyco 440x2 chassis or Mattel HPx2.  Magnets are marked red for the right side and white for the left side.  Installing them like this will be low downforce. These compression molded magnets are engineered for better fit and performance.  

Pro-52™ Titan Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 52 Neo.  Specifically made to fit  Viper V1™, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run DeRosa "Rock" tires, Viper PST "Rock" slip-on tires, or Super Tires in firm compound "B".

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use the top shims. You can NOT run these in a Viper V1 or BSRT G-3R flexible and medium chassis - Only a stiff chassis should be used. 

Can be used in building up a HOPRA legal Drop-In Neo Class Car. 

Viper Magnet Top Shims

Four pairs of shims.  These shims are use on top of 'half height' traction magnets for Viper V1 and BSRT G3-R chassis. 

Magnet Applications:  Black Diamond Pro-10, Pro-25 Cobalt, Pro-35 Silver Bricks, Pro-52 Neo. 

 . 
 

Pro Neo High-Downforce Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 34 Spinner and have a good power supply and controller. They have a smooth field with less 'cog' in the armature. 

High Downforce magnets have crisp, sharp edges that project more gauss to the rails than our other light weight HT neo magnets.  This may require a taller set up for road racing.  

Drag racers may find they could achieve enough downforce with these motor magnets that weaker traction magnets or no traction magnets at all could be run.  

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Pro Neo Light Weight Hi-Temp Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 34 Spinner and have a good power supply and controller. They have a smooth field with less 'cog' in the armature. 

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Black Diamond™ Pro-10™ Traction Magnets 1/2 Height for Tomy Super G Plus
One pair of magnets.  These are the real deal Level 10 grade compression molded full-width magnets.  Specifically made to fit Tomy Super G Plus cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub. 15% stronger than factory SGP traction magnets. 

 These will also fit a Viper V1™, BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "R" notch. 

Full-Height Pro-10^™ Traction Magnets for Viper V1™ and BSRT G3-R
 

One pair of magnets.  These are the real deal Level 10 grade compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub.  Equal in every measure to the factory part.  HOPRA Approved for the Level 10 Poly Mod class. 

Pro-10^TM Poly Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are the real deal Level 10 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved for the level 10 poly mod class. 

Pro-25™ Traction Magnets for  Viper V1 and BSRT G3-R

You get One pair of magnets.  These are 1/2 height, full width Cobalt Level 25 magnets .  Specifically made to fit Viper V1™ and BSRT G3-R cars. Also fits Tomy Super G Plus.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" or Viper PST 'Rock' on a quality aftermarket double flanged hub. 

These will fit a  Viper V1™ and BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "G" notch.   Testing on  a Wizzard Scorpion track in a BSRT G3-R  3 ohm Modified cars shows zero performance difference when compared to the now discontinued factory machined BSRT Level 25 magnets.  

Pro-35™ Silver Bricks^TM  Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 35 Neo.  Specifically made to fit  Viper V1™ chasis, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run firm slip-on tires such as Super Tires in compound "B". 

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use a top shim. You can NOT run these in a Viper V1 or BSRT flexible chassis with a flexible magnet clip.  Only medium and stiff chassis should be used.

     These magnets will also fit into a Wizzard Storm car.

Full-Height Pro-4^™ Traction Magnets for Viper V1™ and BSRT G3-R

One pair of magnets.  These are the real deal Level 4 ('ceramic grade') compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  It is recommend that you run "A" compound slip-on Super Tires on a quality aftermarket hub.  Equal in every measure to the factory part.  HOPRA Approved for level 4 cars. 

Pro-4^™ Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

Pro-52™ Black Widow Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 52 Neo.  Specifically made to fit  Viper V1™, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run firm slip-on tires such as Super Tires in compound "B". 

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use the top shims. You can NOT run these in a BSRT flexible and medium chassis.  Only a stiff chassis should be used.

     Price is less than 1/2 per pair from the "G Guys".   Gauss measurments show the Pro-52s to be as strong or stronger than factory G parts.  These magnets will also fit into a Wizzard Storm car.

Pro-10™ Compression Molded Motor Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 10 compression molded motor magnets specifically made to fit Wizzard Storm cars and black epoxy coated.  These are sold as a hop-up part for Stock Storm cars or as for running the HOPRA P10 Class.     

A good starting point for a build formula is a stiff Strom chassis, 3 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 

Pro-10™ Compression Molded Traction Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 10 compression molded traction magnets specifically made to fit Wizzard Storm cars and black epoxy coated.  These are sold as a hop-up part for Stock Storm cars or as for running the HOPRA P10 Class.     

A good starting point for a build formula is a stiff Strom chassis, 3 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 

The magnets are north/south oriented so they can be run in either high or low downforce. HOPRA approved for the Level 10 Poly Mod class. 
 

Pro-4™ Compression Molded Motor Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 4 compression molded motor magnets specifically made to fit Wizzard Storm cars and black epoxy coated.  These are sold as a hop-up part for Stock Storm cars.     

A good starting point for a build formula is a standard Strom chassis, 6 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 

Pro-4™ Compression Molded Traction Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 4 compression molded traction magnets specifically made to fit Wizzard Storm cars. These are sold as a hop-up part for Stock Storm cars.     

A good starting point for a build formula is a standard Strom chassis, 6 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 

The magnets are north/south oriented so they can be run in either high or low downforce.  
 

Wizzard Storm Ceramic Motor Magnets - 10 Pairs

10 pair of magnets.  These are the real deal, new, never run, ceramic Wizzard Storm Motor Magnets from the original supplier.  

 .