Please scroll down to add to cart. Viper Scale Racing - Weighted Class Cars and Parts

Viper Scale Racing - Weighted Class Cars and Parts

HCS AMG Brass Independent O-Ring Front End Set for Viper V1, BSRT G3-R, Tomy Cars

HCS AMG Brass Independent O-Ring Front End Set for Viper V1,  BSRT G3, Tomy SG+

CNC machined in the USA by RTHO brass front 'o-ring' hubs and axle sets.  These are designed to run in Viper V1 & BSRT G3-R for weighted or 'brass class' cars.  Other applications can be done.  Comes with 1 set of o-rings.  Different size o-rings can be fitted for fine tuning ride height.  Weight for complete set is 2 grams. 

You get one (1) complete axle set: Hubs, O-Rings, Axle.  Chassis NOT included - for display only.

 

 

$11.99
HCS AMG Front & Rear Weight Set for Viper V1 Viper-Jet Cars

 HCS Weight Set for Viper V1 Viper-Jet Cars

One set of front and rear weights.  Specifically made to fit Viper V1™ cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Front buttons are CNC brass, magnet box weights are molded copper.  Car for example only and not included.

 

$7.95
HCS AMG Front Weight Set for Viper V1™ Viper-Jet™ Cars

 HCS AMG Front Weight Set for Viper V1 Viper-Jet Cars

One set of front weights.  Specifically made to fit Viper V1™ cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Front buttons are CNC brass. Car for example only and not included.

 

$3.95
HCS AMG Pro-Trax 7T Tyco Style Delrin Pinion Gear

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

$1.65
HCS AMG Pro-Trax 7T Tyco Style Delrin Pinion Gears - 5 Each

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gears

Five each 7T Gears. Mates with Viper crown gears as well as Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

$7.49
HCS AMG Rear Weight Set for Viper V1 Viper-Jet & BSRT G3-R Cars

 HCS AMG Rear Weight Set for Viper V1 Viper-Jet and BSRT G3-R Cars

One set of rear weights.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Weights are molded copper.  Car for example only and not included.

 

$4.49
HCS Viper V1 Viper Jet™ 6 Ohm 12 Volt Weighted Class RTR HO Slot Car

HCS Viper V1 Viper Jet ™ 6 Ohm RTR Weighted Class Car

Viper V1 Flexible chassis; Viper Razor o-ring front axle set; Viper guide pin; Viper tweaked endbell, pickup shoes, hangers and springs; Pro-4 motor magnets; Pro-Trax 7/22 gears and double flanged rear hubs; Viper PST soft slip-on rear tires.  Viper 6 ohm red wire armature.  Broken in and track tested.  Car is set up for common routed tracks with .416 or .420 rear tires.  Set up low, you may need to make tire adjustments to fit your conditions.

The Viper Jet™ 12 volt ready to run car is based on the highly popular and successful V1 platform with the addition of CNC machined brass and molded copper weights. This car is designed to be run on 12 volts and packs a ton of fun. Cars are very drivable and don’t require cat like reflexes sometimes needed for today’s modern inline magnet cars. The V1 platform is fully upgradable and all parts are 100% replaceable. We’re very excited for this version of the V1 to hit the tracks all over the world.

HOPRA Approved Chassis.

$52.95
Pro-Trax Double Flanged .250 OD Narrow Machined Delrin Rear Hubs - 2 sets

Pro-Trax™ Double Flanged Light Weight .250 OD Machined Delrin Narrow Rear Hubs

Two pairs of  narrow style True Pro Quality Precision CNC Machined Delrin Rear Hubs.  Will fit Tomy Super G Plus cars and Viper V1™ and BSRT G3 cars running full-width traction magnets and still be 'legal' over-all width. 

Works well on all brands of HO slot cars when properly installed with quality HO tire and press tools.  

(rear axle set-up in photo not included) 

$7.49
Viper Scale Racing - ''HardSpline'' Steel Center Splined .059 Rear Axle

HardSpline™ Steel Center Splined .059 Rear Axles

These are Precision Cut at 1.113 length from billet steel stock.  Center splined to assure positive crown gear placement. Axles are centerless ground, hardened, and nickel plated.  They are great replacements for any BSRT G-3, Tyco 440 car, or other HO slot cars.  Priced per each axle.
 

$2.49
Viper Scale Racing - .008 Pro Pickup Shoe Springs - 4 Sets

Viper Scale Racing .008 Pro Pickup Shoe Springs - 4 Sets

VSR .008" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.

These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.

$2.95
Viper Scale Racing - Pro Recessed Pickup Shoe Hangers - 1 Set

Viper Scale Racing Pro Recessed Pickup Shoe Hangers - 1 Set

The Viper Scale Racing Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

  • Recessed Hinge Point
  • Shunt Hole
  • Lighter
  • Faster
  • Easy to install
$2.49
Viper Scale Racing - Pro Recessed Pickup Shoe Hangers - 3 Sets

Viper Scale Racing Pro Recessed Pickup Shoe Hangers - 3 Sets

The Viper Scale Racing Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

  • Recessed Hinge Point
  • Shunt Hole
  • Lighter
  • Faster
  • Easy to install
$6.95
Viper Scale Racing - Standard Motorbrush Endbell Assembly

Viper Scale Racing Standard Motorbrush Endbell Assembly

All new VSR standard endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'. Larger brushes provide 20% more contact area then the stock SG+ unit.

This is a great stock replacement part or even a upgrade over stock.

  • Arched Contacts
  • 20% more brush area
  • All new design

 

$7.95
Viper Scale Racing - Standard Profile Pickup Shoes - 1 Set

Viper Scale Racing Standard Profile Pickup Shoes - 1 Set

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

  • Lightweight Design
  • Long High Contact Surface
  • Long Lasting
  • Faster Lap Times
  • Better Handling
$1.75
Viper Scale Racing 6 Ohm Dynamically Balanced Pro Stock Armature for Viper V1, BSRT G3, & Tomy SG+

Viper Scale Racing 6 ohm Dynamically Balanced Pro Stock Armature

All new VSR Pro Stock armature. These stock armatures have an epoxied and trued commutator and are dynamically balanced.  Road racing applications with Pro-4™ traction magnets and PST slipon tires or all ceramic cars with silicone sponge tires. Can be run with Pro-10 traction magnets with hard slip-on tires.  These arms average 6.10 ohms.  The Pro Stock armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck.

  • Stock 6 ohm class armature
  • Epoxied, Trued Comm, Dynamically Balanced
  • Drop in replacement for SG+, V1, BSRT G cars
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$15.95
Viper Scale Racing 6 Ohm Stock Armature for Viper V1, BSRT G3, & Tomy SG+

Viper Scale Racing 6 ohm Stock Armature

All new VSR stock armature. This is a standard production armature for road racing applications with Pro-4™ traction magnets and PST slipon tires.  Can be run with Pro-10 traction magnets with hard slip-on tires.  These arms average 6.10 ohms.  The stock armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck.

  • Stock 6.00 ohm class armature
  • Drop in replacement for SG+, V1, BSRT G cars
  • Low cost
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$5.95
Viper Scale Racing Pro-Trax - Rear Armature Bushing

Viper Scale Racing Pro-Trax™ Rear Armture Bushing

One each rear machined armature bushing.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$1.75
Viper Scale Racing Pro-Trax 22T Crown Gear

Viper Scale Racing Pro-Trax™ 22T Crown Gear

One each 22T Gear.  Injection molded from the best materials available.  Low profile design to save weight. Molded in tooth count markings.  Mate with Viper 7T pinion gears as well as Tomy, BSRT, and Tyco pinion gears.  (photo shows three, but priced individually)

$2.49
Viper Scale Racing PST Silicone Slip-On S1 - .424 OD Dark Blue

Viper Scale Racing PST Silicone Slip-On S-1 Compound

.424 OD  Dark Blue

One pair of tires.  Sized for standard Viper rear double flanged rims that are .250 OD. 

These are softer S-1 compound tires for cars with less powerful traction magnets.  Not recomended for polymer class cars running Level 10 or higher magnets. 

They can be used on other rim configurations.

$2.99
Viper Scale Racing PST Silicone Slip-On S1 - .428 OD White

Viper Scale Racing PST Silicone Slip-On S-1 Compound

.428 OD  White

One pair of tires.  Sized for standard Viper rear double flanged rims that are .250 OD. 

These are softer S-1 compound tires for cars with less powerful traction magnets.  Not recomended for polymer class cars running Level 10 or higher magnets. 

They can be used on other rim configurations.

$2.99
Viper Scale Racing PST Silicone Slip-On S1 - .432 OD Green

Viper Scale Racing PST Silicone Slip-On S-1 Compound

.432 OD  Green

One pair of tires.  Sized for standard Viper rear double flanged rims that are .250 OD. 

These are softer S-1 compound tires for cars with less powerful traction magnets.  Not recomended for polymer class cars running Level 10 or higher magnets. 

They can be used on other rim configurations.

$2.99
Viper Scale Racing V1 Pro Racing Flexible Chassis - HOPRA Approved

Viper Scale Racing V1 Flexible Chassis

One flexible chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts. 

Flexible chassis designed for ceramic class and weighted class cars.  Level 4 may be indicated for some track applications. Not recommended for Level 10 or higher magnets. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

$11.95
Viper V1 - Pro-4™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-4 Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

 

$9.95