Please scroll down to add to cart. Tomy Super G Plus, SRT, and Turbo Cars and Parts

Tomy Super G Plus, SRT, and Turbo Cars and Parts

Hard Body Clip for Viper V1, BSRT G3, Tomy Super G Plus - Low Rider Style

 Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 

 

 

$2.74
Hard Body Clip for Viper V1, BSRT G3, Tomy Super G Plus - Standard Tomy SG+ Style

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 

 

 

$2.49
HCS AMG 1.5 Ohm NXS Hi-Temp Dynamically Balanced High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

HCS AMG 1.5 Ohm NXS Hi-Temp Dynamically Balanced High Speed Armature

All new HC Slots NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. High RPM: dynamically balanced, tool-post ground stack laminations, epoxied and diamond trued comms. These arms average 1.5 ohms.  For road racing, Pro-10 Motor and Pro-35 Traction Magnets are recommended. The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

  • High Speed 1.5 ohm
  • Epoxied, Ground Lamination Stacks, Trued Commutator
  • Dynamically Balanced
  • Drop in replacement for SG+, V1, BSRT G cars
  • Great Speed Value
  • FAST FAST FAST

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

 


 

$29.95
HCS AMG 2.5 Ohm NXS Hi-Temp Dynamically Balanced High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

HCS AMG 2.5 Ohm NXS Hi-Temp Dynamically Balanced High Speed Armature

All new HC Slots NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakealite commutators. High RPM: dynamically balanced, tool-post grond stack laminations, epoxied and diamond trued comms. Great armatures for road racing applications with Pro-10™ motor & Pro-25™ Cobalt traction magnets with firm Super Tires "B" slip-on tires.  Makes a good drag motor too with Pro-4™ magnets.  These arms average 2.5 ohms.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

  • High Speed 2.5 ohm
  • Epoxied, Gound Lamination Stacks, Trued Commutator
  • Dynamically Balanced
  • Drop in replacement for SG+, V1, BSRT G cars
  • Great Speed Value
  • FAST FAST FAST

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

Neo motor magnets are not recommended with this armature.


 

$24.95
HCS AMG 2.8 Ohm Dynamically Balanced High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

HCS AMG 2.8 ohm Dynamically Balanced High Speed Armature

All new HC Slots High Speed modified armatures. High RPM: dynamically balanced, tool-post ground stack laminations, epoxied and diamond trued comms. Great armatures for road racing applications with Pro-10™ traction magnets and PST slipon tires.  Makes a good drag motor too with Pro-4 magnets.  These arms average 2.8 ohms.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

  • High Speed 2.8 ohm
  • Epoxied, Gound Lamination Stacks, Trued Commutator
  • Dynamically Balanced
  • Drop in replacement for SG+, V1, BSRT G cars
  • Great Speed Value
  • FAST FAST FAST

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.


 

$19.95
HCS AMG 6 Ohm Econo Dynamically Balanced Pro Stock Armature for Viper V1, BSRT G3, & Tomy SG+

HCS AMG 6 Ohm Econo Dynamically Balanced Pro Stock Armature

These stock stock armatures are machine dynamically balanced.  Road racing applications with Pro-4™ traction magnets and PST slipon tires or all ceramic cars with silicone sponge tires. Can be run with Pro-10 traction magnets with hard slip-on tires.  These arms average 6.10 ohms.  The hot stock armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck.

  • Stock 6 ohm class armature
  • Machine Dynamically Balanced - no gluing or epoxy
  • Drop in replacement for SG+, V1, BSRT G cars
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$9.95
HCS AMG Pro Light Weight Level 25 Cobalt Motor Magnets for Viper V1, BSRT G3-R, Tomy Super G Plus

Pro Light Weight Level 25 Cobalt Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal light weight design Level 25 Cobalt  motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of restricted open road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 35 Spinner and have a good power supply and controller.   

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

$26.95
HCS AMG Pro-Trax 7T Tyco Style Delrin Pinion Gear

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions. Used by many national level racers on Super Stock and Modifed cars.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

$1.65
Tomy Turbo - AMG Pro-10™ Traction Magnet Bar for Tomy Turbo

Pro-10™ Traction Magnet Bar for Tomy Turbo Cars

One magnet bar.  These are Level 10 traction magnet bars specifically made to fit Tomy Turbo cars.  A great upgrade from the weak factyory ceramic traction magnet bar.   Add a set of quality after-market slip-on tires and Turbo can be fun to run !!!

  

$4.95
Tomy Turbo - Bracket Sportsman NXS 2.5 Ohm RTR HO Drag Slot Car

HCS AMG -  "Bracket Sportsman" Tomy Turbo 2.5 Ohm RTR Drag Car 

The Sportsman starts off with an NOS Tomy Turbo chassis.  Armature is upgraded to HCS AMG 2.5 Ohm NXS.  HCS Pro-10 Traction Magnet Bar.  Factory Turbo 23T crown gears and HCS AMG 7T pinion gears.  New rear slip-on HCS or Super Tires. Dyno tested.   Hubs will be either gray or yellow.

 

$29.95
Tomy Turbo RS Level 42 Neo Race Car w/ HCS AMG Slip-Ons

Tomy Turbo RS Road Race Car

NOS Parts Car - 6 ohm factory armature, neo-resin Level 42 traction magnet bar.  Allows the car to run like an SRT.  Cars are fitted with factory Turbo 23T crown gears and 7T pinion gears.  New rear slip-on HCS Tires.  

RS - Road Sportsman. Track tested.  

 

$26.95
Viper Scale Racing - .008 Pro Pickup Shoe Springs - 4 Sets

Viper Scale Racing .008 Pro Pickup Shoe Springs - 4 Sets

VSR .008" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.

These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.

$2.95
Viper Scale Racing - Low Profile Pickup Shoes - 1 Set

Viper Scale Racing Low Profile Pickup Shoes - 1 Set

 

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

  • Lightweight Design
  • Low Profile
  • Long High Contact Surface
  • Long Lasting
  • Faster Lap Times
  • Better Handling
$1.75
Viper Scale Racing - Motorbrush Endbell Key

Viper Scale Racing Motorbrush Endbell Key

All new VSR endbell key for V1, Super G+ and BSRT G cars. You get one new VSR endbell key for V1, Super G+ and BSRT G cars.   

A must-have tool to properly spread the motorbrush arms inside the endbell so that they do not get damaged installing or removing the armature

$1.25
Viper Scale Racing - Pro Recessed Pickup Shoe Hangers - 1 Set

Viper Scale Racing Pro Recessed Pickup Shoe Hangers - 1 Set

The Viper Scale Racing Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

  • Recessed Hinge Point
  • Shunt Hole
  • Lighter
  • Faster
  • Easy to install
$2.49
Viper Scale Racing - Standard Motorbrush Endbell Assembly

Viper Scale Racing Standard Motorbrush Endbell Assembly

All new VSR standard endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'. Larger brushes provide 20% more contact area then the stock SG+ unit.

This is a great stock replacement part or even a upgrade over stock.

  • Arched Contacts
  • 20% more brush area
  • All new design

 

$7.95
Viper Scale Racing - Standard Profile Pickup Shoes - 1 Set

Viper Scale Racing Standard Profile Pickup Shoes - 1 Set

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

  • Lightweight Design
  • Long High Contact Surface
  • Long Lasting
  • Faster Lap Times
  • Better Handling
$1.75
Viper Scale Racing 1.5 Ohm NXS Hi-Temp High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

Viper  Scale Racing 1.5 Ohm NXS Hi-Temp High Speed Armature

All new Viper NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. These arms average 1.5 ohms.  For drag racing, Pro-4 or Pro-10 Motor Magnets are recommended. The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

  • High Speed 1.5 ohm
  • Drop in replacement for SG+, V1, BSRT G cars
  • Great Speed Value
  • FAST FAST FAST

 

 


 

$13.95
Viper Scale Racing 2.5 Ohm NXS Hi-Temp Stock High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

Viper Scale Racing 2.5 Ohm NXS Hi-Temp Stock High Speed Armature

All new NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakealite commutators. Great armatures for road racing applications with Pro-10™ motor & Pro-25™ Cobalt traction magnets with firm Super Tires "B" slip-on tires.  Makes a good drag motor too with Pro-4™ magnets.  These arms average 2.5 ohms.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

  • High Speed 2.5 ohm
  • Drop in replacement for SG+, V1, BSRT G cars
  • Great Speed Value
  • FAST FAST FAST

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.


 

$9.95
Viper Scale Racing 2.8 Ohm HOT High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

Viper Scale Racing 2.8 ohm High Speed Armature

All new VSR High Speed modified armature. This is a high horsepower production armature for road racing applications with Pro-10™ traction magnets and PST slipon tires.  Makes a good drag motor too.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

  • High Speed 2.8 ohm
  • Looks Stock
  • Drop in replacement for SG+, V1, BSRT G cars
  • Low cost
  • FAST FAST FAST

 


 

$7.95
Viper Scale Racing 6 Ohm Dynamically Balanced Super Stock Armature for Viper V1, BSRT G3, & Tomy SG+

Viper Scale Racing 6 ohm Dynamically Balanced Super Stock Armature

All new VSR Pro Stock armature. These stock armatures have an epoxied and trued commutator and are dynamically balanced.  Road racing applications with Pro-4™ traction magnets and PST slipon tires or all ceramic cars with silicone sponge tires. Can be run with Pro-10 traction magnets with hard slip-on tires.  These arms average 6.10 ohms.  The Pro Stock armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck.

  • Stock 6 ohm class armature
  • Epoxied, Trued Comm, Dynamically Balanced
  • Drop in replacement for SG+, V1, BSRT G cars
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$15.95
Viper Scale Racing Aluminum Body Posts for BSRT & Tomy A/FX Supe G Plus

Viper Aluminum Body Posts for BSRT & Tomy A/FX Super G Plus

You get 1 set of 4 posts. They are a direct screw-in fit for BSRT G3 and G3-R cars.  They can be fitted to Tomy Super G Plus and other brands of HO slot cars with properly located and drilled chassis.

Engineered and made from the best materials available.

Chassis in photos for example only, not included.  BSRT G3 is left rear, Tomy SG+ is right rear, Tyco 440 Narrow in front.

$4.49
Viper Scale Racing Low Friction Guide Pin for Viper V1, BSRT G3, and Tomy Cars

Viper Low Friction Guide Pin

They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .180 deep.  Engineered and made from the best materials available.

 

$2.49
Viper Scale Racing Razor O-Ring Front End Set for Viper V1, BSRT G3-R, Tomy Super G Plus

Vper O-Ring Front End Set for Viper V1,  BSRT G3, Tomy SG+

You get one (1) complete axle set: Hubs, O-Rings, Axle.  Get your ride slammed for best handling!!   These are the real-deal CNC machined Delrin front 'o-ring' hubs and axle sets.  .

These are designed to run in Viper V1, BSRT G3-R and Tomy Super G Plus.  Other applications can be done with different size o-rings installed.  Comes with 2 sets of o-rings to get your car 'slammed'!!

Large O-rings finish at .354 OD. Smaller rings finish off at .340 OD.  

Sets shipped with hubs pressed on loose.  You may need press or other proper tools to get and exact fit to your specific car.  Chassis NOT included - for display only.

 

 

$4.49
Viper V1 - Pro-10™ Black Diamond 1/2 Height Traction Magnets for Tomy Super G Plus, Viper V1 & BSRT G3-R

Black Diamond™ Pro-10™ Traction Magnets 1/2 Height for Tomy Super G Plus
One pair of magnets.  These are the real deal Level 10 grade compression molded full-width magnets.  Specifically made to fit Tomy Super G Plus cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub. 15% stronger than factory SGP traction magnets. 

 These will also fit a Viper V1™, BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "R" notch. 

$5.95
Viper V1 - Pro-10™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-10TM Poly Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are the real deal Level 10 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved for the level 10 poly mod class. 

 

$11.95
Viper V1 - Pro-25™ Cobalt Traction Magnets for Viper V1, BSRT G3-R & Tomy SG+ Cars

Pro-25™ Traction Magnets for  Viper V1 and BSRT G3-R

You get One pair of magnets.  These are 1/2 height, full width Cobalt Level 25 magnets .  Specifically made to fit Viper V1™ and BSRT G3-R cars. Also fits Tomy Super G Plus.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" or Viper PST 'Rock' on a quality aftermarket double flanged hub. 

These will fit a  Viper V1™ and BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "G" notch.   Testing on  a Wizzard Scorpion track in a BSRT G3-R  3 ohm Modified cars shows zero performance difference when compared to the now discontinued factory machined BSRT Level 25 magnets.  

$18.95
Viper V1 - Pro-35™ Neo Silver Bricks Magnets for Viper V1 and BSRT G3-R & Tomy SG+ Cars

Pro-35™ Silver BricksTM  Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 35 Neo.  Specifically made to fit  Viper V1™ chasis, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run firm slip-on tires such as Super Tires in compound "B". 

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use a top shim. You can NOT run these in a Viper V1 or BSRT flexible chassis with a flexible magnet clip.  Only medium and stiff chassis should be used.

     These magnets will also fit into a Wizzard Storm car.

$11.95
Viper V1 - Pro-4™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-4 Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

 

$9.95