Controllers, Accessories, Tools, Power Supplies

Auto World HO Slot Car Factory Adjustable Power Supply - 9 to 24 Volts
Auto World HO Slot Car Power Supply - 9 to 24 Volts

You get one factory adjustable power supply.  Adjustable for 9 volts to 24 volts so you can 'tune' your track for young drivers to keep the cars from flying off the track as much.  2 Amps current lets you run magnets cars with less stress. 

Works on Auto World and Tomy AFX race sets.  It does not plug into other brands like Tyco or Life Like.  


 

$29.95
Auto World HO Slot Car Factory Set Controller Pair - 40 Ohm
Auto World HO Slot Car Controllers  - 40 Ohm

You get one set of 40 Ohm HO slot car set controllers.  

These work on Auto World and Tomy AFX race sets.  They do not plug into other brands like Tyco or Life Like.  These controllers will work better on hopped up HO slot cars much better than the Tomy AFX 120 Ohm controllers.  So if your Tomy AFX 120 controllers are not much more than an "on-off" switch for your better HO cars, try these.

If you are good with splicing and soldering electrical wires, you can retro-fit these to other brands of sets by using their plugs.  NO warranties if you do this. 

 
 
 
 
 

 


 

$22.95
DS Electronic Racing Products - 25 Ohm HO Slot Car Controller
DS Electronic Racing Products - 25 Ohm HO Slot Car Controller
 

Solid state HO slot car controller.  Unit has a printed circuit board for exceptional trigger feel.  This unit is a hands-down superior product to the Parma wire-wound resistor technology.  You won't believe how smooth the unit is !!!
 
Comes with clips but you will need to crimp and/or solder them on yourself.  Most magnet cars will not need the red brake clip hooked up. 
 
Controller handle color is NOT an option.
 
 
1) 25 ohm Controllers good for:  hopped up Life Like "T" cars, hopped up Tomy Super G Plus, Viper 6 ohm Level 4 cars, Viper 3 ohm Level 10 cars, BSRT G3 cars, Wizzard Storm cars.
 
2) 35 ohm Controllers good for: hopped up Life Like "T"and "M" cars, hopped up Tomy Mega-G, Tomy Super G Plus, Viper 6 ohm Level 4 cars, BSRT 902 cars, hopped up Tyco 440 style cars.
 
3) 45 ohm Controllers good for: Mega-G +, Tomy Super G Plus and SRT, 9 ohm in-line cars, stock factory Life Like "T" and "M" cars, stock factory Tyco 440 style cars. 
 
 
 


 

$54.95
DS Electronic Racing Products - 35 Ohm HO Slot Car Controller
DS Electronic Racing Products - 35 Ohm HO Slot Car Controller
 
Solid state HO slot car controller.  Unit has a printed circuit board for exceptional trigger feel.  This unit is a hands-down superior product to the Parma wire-wound resistor technology.  You won't believe how smooth the unit is !!!
 
Comes with clips but you will need to crimp and/or soldered them on yourself.  Most magnet cars will not need the red brake clip hooked up. 
 
Controller handle color is NOT an option.
 
 
1) 25 ohm Controllers good for:  hopped up Life Like "T" cars, hopped up Tomy Super G Plus, Viper 6 ohm Level 4 cars, Viper 3 ohm Level 10 cars, BSRT G3 cars, Wizzard Storm cars.
 
2) 35 ohm Controllers good for: hopped up Life Like "T"and "M" cars, hopped up Tomy Mega-G, Tomy Super G Plus, Viper 6 ohm Level 4 cars, BSRT 902 cars, hopped up Tyco 440 style cars.
 
3) 45 ohm Controllers good for: Mega-G +, Tomy Super G Plus and SRT, 9 ohm in-line cars, stock factory Life Like "T" and "M" cars, stock factory Tyco 440 style cars. 
 
 
 


 

$54.95
HCS AMG - Wheel Hub & Gear Press Tool

HCS AMG - Wheel Hub & Gear Press Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$25.95
HCS AMG - Wheel Hub Removal Tool

HCS AMG - Wheel Hub Removal Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool.  Removes hubs with the axle in or out of the chassis.  Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis. This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting wheel hubs.  Chassis not included.

$18.95
HO Slot Car Oiler - Viper Juice

HC Slots "Viper Juice" Slot Car Oiler

Just what you need on the work bench or track-side.  The best synthetic oil available. 

Refillable bottle design.

$4.99
Mid-America Slot Car Racing Products - 35 Ohm HO Slot Car Controller
Mid-America Slot Car Racing Products - 35 Ohm HO Slot Car Controller
 
Solid state HO slot car controller.  Unit has a printed circuit board for exceptional trigger feel.  This unit is a hands-down superior product to the Parma wire-wound resistor technology.  You won't believe how smooth the unit is !!!
 
Does not include clips. Most magnet cars will not need the red brake clip hooked up. 
 
1) 35 ohm Controllers good for: hopped up Life Like "T"and "M" cars, hopped up Tomy Mega-G, Tomy Super G Plus, Viper 6 ohm Level 4 cars, BSRT 902 cars, hopped up Tyco 440 style cars.
 
2) 45 ohm Controllers good for: Mega-G +, Tomy Super G Plus and SRT, 9 ohm in-line cars, stock factory Life Like "T" and "M" cars, stock factory Tyco 440 style cars. 
 
 
 


 

$59.95
Mid-America Slot Car Racing Products - 45 Ohm HO Slot Car Controller
Mid-America Slot Car Racing Products - 45 Ohm HO Slot Car Controller
 
Solid state HO slot car controller.  Unit has a printed circuit board for exceptional trigger feel.  This unit is a hands-down superior product to the Parma wire-wound resistor technology.  You won't believe how smooth the unit is !!!
 
Does not include clips. Most magnet cars will not need the red brake clip hooked up. 
 
1) 35 ohm Controllers good for: hopped up Life Like "T"and "M" cars, hopped up Tomy Mega-G, Tomy Super G Plus, Viper 6 ohm Level 4 cars, BSRT 902 cars, hopped up Tyco 440 style cars.
 
2) 45 ohm Controllers good for: Mega-G +, Tomy Super G Plus and SRT, 9 ohm in-line cars, stock factory Life Like "T" and "M" cars, stock factory Tyco 440 style cars. 
 
 
 


 

$59.95
Vibra-Tite VC-3 Threadmate - Non-Hardening Threadlocker

Vibra-Tite VC-3 Threadmate 

     VC-3 is a non-hardening threadlocker that comes in handy for a variety of HO slot car applications.  Traditionally it has been used to keep Wizzard brush barrel screws from backing out during racing.  It also is good for lexan body pins to keep bodies secured during a race.

NOTE: The factory has stopped packaging the product in a retail card.  Tubes will be shipped in a plastic bag. 

     Depending on how you apply it, you can use it as a 'glue' or a gap-filling compound.  If you mate parts while the VC-3 is freshly applied, it will dry after a point to 'cement' parts in  place.  But, parts can be pulled apart carefully when needed.  If you let the VC-3 flash off before mating parts, it will get stiff and not be tacky.  This can create a space-filling application such as lexan body pins for BSRT Scale Auto G3 body posts.

     VC-3 has been used with success for securing HC Slots 'clip-on' lexan bodies to their specific chassis application.  Most commonly this is the Frog body onto a Tyco 440x2 narrow chassis.

NOTE: Due to supply chain issues with the manufacture, tubes are no longer packaged in sealed cards.  There was also a drastic price increase due to labor and materials. 

$8.95
Viper Scale Racing - Compact Tire Gauge Tool - .324" to .346"

Viper Scale Racing - Compact Tire Gauge - .324 to .346

Introducing the official Viper Scale Racing Compact Tire Gauge. This Gauge is the perfect size to fit into your HO pit box.

Size your front tires from .324 - .346" in .002" steps.  ( More Gauges coming soon) 

$9.95
Viper Scale Racing - Compact Tire Gauge Tool - .416" to .438"

Viper Scale Racing - Compact Tire Gauge - .416 to .438

Introducing the official Viper Scale Racing Compact Tire Gauge. This Gauge is the perfect size to fit into your HO pit box.

Size your rear tires from .416-.438" in .002" steps.  ( More Gauges coming soon) 

$9.95
Viper Scale Racing - Motorbrush Endbell Key

Viper Scale Racing Motorbrush Endbell Key

All new VSR endbell key for V1, Super 7,. Super G+ and BSRT G cars. You get one new VSR endbell key for V1, Super G+ and BSRT G cars.   

A must-have tool to properly spread the motorbrush arms inside the endbell so that they do not get damaged installing or removing the armature

$1.25
Viper Scale Racing - Pinion Installation and Removal Tool

Viper Scale Racing - Pinion Installation & Removal Tool

The proper tool needed to hold pinion gears while pressing them onto the armature shafts.  Makes short work of installing and adjusting pinion gears.

Color will be yellow or purple.  Pinion gears not included.

$10.95