You get one set of 40 Ohm HO slot car set controllers.  

These work on Auto World and Tomy AFX race sets.  They do not plug into other brands like Tyco or Life Like.  These controllers will work better on hopped up HO slot cars much better than the Tomy AFX 120 Ohm controllers.  So if your Tomy AFX 120 controllers are not much more than an "on-off" switch for your better HO cars, try these.

If you are good with splicing and soldering electrical wires, you can retro-fit these to other brands of sets by using their plugs.  NO warranties if you do this. 

DD502: Neo HD30 controller w/ traction control. 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats w/ traction control. 

* Traction control: Traction control works by limiting the amount of power available on the last bands of the controller before full power. This reduced power helps keep from overpowering the car at the end of a turn and sliding out or crashing.

* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for almost every H.O. scale car. DiFalco offers a special DD282 network ($18.50) that is recommend for T-jet and Fray racers.

NOTE: The 502 does not have a 'coast' feature.

DD502: Neo HD30 controller w/ traction control. 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats w/ traction control. 

* Traction control: Traction control works by limiting the amount of power available on the last bands of the controller before full power. This reduced power helps keep from overpowering the car at the end of a turn and sliding out or crashing.

* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for almost every H.O. scale car. DiFalco offers a special DD282 network ($18.50) that is recommend for T-jet and Fray racers.

NOTE: The 502 does not have a 'coast' feature.

DD502: Neo HD30 controller w/ traction control. 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats w/ traction control. 

* Traction control: Traction control works by limiting the amount of power available on the last bands of the controller before full power. This reduced power helps keep from overpowering the car at the end of a turn and sliding out or crashing.

* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for almost every H.O. scale car. DiFalco offers a special DD282 network ($18.50) that is recommend for T-jet and Fray racers.

NOTE: The 502 does not have a 'coast' feature.

DD502: Neo HD30 controller w/ traction control. 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats w/ traction control. 

* Traction control: Traction control works by limiting the amount of power available on the last bands of the controller before full power. This reduced power helps keep from overpowering the car at the end of a turn and sliding out or crashing.

* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for almost every H.O. scale car. DiFalco offers a special DD282 network ($18.50) that is recommend for T-jet and Fray racers.

NOTE: The 502 does not have a 'coast' feature.

DD502: Neo HD30 controller w/ traction control. 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats w/ traction control. 

* Traction control: Traction control works by limiting the amount of power available on the last bands of the controller before full power. This reduced power helps keep from overpowering the car at the end of a turn and sliding out or crashing.

* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for almost every H.O. scale car. DiFalco offers a special DD282 network ($18.50) that is recommend for T-jet and Fray racers.

NOTE: The 502 does not have a 'coast' feature.

The HO Lite is an entry-level HO Scale electronic controller, intended for use with All HO cars from Tjets to 6 ohm magnet cars operating up to 24V but is best between 12-20V.  Cars in the range of the controller include, 6 ohm Tyco, Tomy, LifeLike, Wizzard, Slottech and Viper cars, all OS3 TFX, Autoworld and DASH cars, Mega G, and all vintage Tyco and Aurora cars.   It features all of the basics of the Pro Series controllers.  It has 38" of color matching 16ga super flexible silicone wire outside the handle connected to color matching insulators over steel clips.   Designed to handle rough use, the fuse and Sensitivity knob are tucked into the handle and are not as susceptible to drops.   The color-coded wire makes it easier to ensure the correct wire makes it to the correct post.   The absence of a Brake Pot means no brakes to blow when hooked up wrong.   These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your ALL Pro.   It features the following Controls:

Adjustable Sensitivity   Provides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V.

On/Off Brakes Brakes are available when the RED wire is connected.

The HO Lite is an entry-level HO Scale electronic controller, intended for use with All HO cars from Tjets to 6 ohm magnet cars operating up to 24V but is best between 12-20V.  Cars in the range of the controller include, 6 ohm Tyco, Tomy, LifeLike, Wizzard, Slottech and Viper cars, all OS3 TFX, Autoworld and DASH cars, Mega G, and all vintage Tyco and Aurora cars.   It features all of the basics of the Pro Series controllers.  It has 38" of color matching 16ga super flexible silicone wire outside the handle connected to color matching insulators over steel clips.   Designed to handle rough use, the fuse and Sensitivity knob are tucked into the handle and are not as susceptible to drops.   The color-coded wire makes it easier to ensure the correct wire makes it to the correct post.   The absence of a Brake Pot means no brakes to blow when hooked up wrong.   These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your ALL Pro.   It features the following Controls:

Adjustable Sensitivity   Provides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V.

On/Off Brakes Brakes are available when the RED wire is connected.

The HO Lite is an entry-level HO Scale electronic controller, intended for use with All HO cars from Tjets to 6 ohm magnet cars operating up to 24V but is best between 12-20V.  Cars in the range of the controller include, 6 ohm Tyco, Tomy, LifeLike, Wizzard, Slottech and Viper cars, all OS3 TFX, Autoworld and DASH cars, Mega G, and all vintage Tyco and Aurora cars.   It features all of the basics of the Pro Series controllers.  It has 38" of color matching 16ga super flexible silicone wire outside the handle connected to color matching insulators over steel clips.   Designed to handle rough use, the fuse and Sensitivity knob are tucked into the handle and are not as susceptible to drops.   The color-coded wire makes it easier to ensure the correct wire makes it to the correct post.   The absence of a Brake Pot means no brakes to blow when hooked up wrong.   These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your ALL Pro.   It features the following Controls:

Adjustable Sensitivity   Provides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V.

On/Off Brakes Brakes are available when the RED wire is connected.

The HO Lite is an entry-level HO Scale electronic controller, intended for use with All HO cars from Tjets to 6 ohm magnet cars operating up to 24V but is best between 12-20V.  Cars in the range of the controller include, 6 ohm Tyco, Tomy, LifeLike, Wizzard, Slottech and Viper cars, all OS3 TFX, Autoworld and DASH cars, Mega G, and all vintage Tyco and Aurora cars.   It features all of the basics of the Pro Series controllers.  It has 38" of color matching 16ga super flexible silicone wire outside the handle connected to color matching insulators over steel clips.   Designed to handle rough use, the fuse and Sensitivity knob are tucked into the handle and are not as susceptible to drops.   The color-coded wire makes it easier to ensure the correct wire makes it to the correct post.   The absence of a Brake Pot means no brakes to blow when hooked up wrong.   These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your ALL Pro.   It features the following Controls:

Adjustable Sensitivity   Provides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V.

On/Off Brakes Brakes are available when the RED wire is connected.

The HO Lite is an entry-level HO Scale electronic controller, intended for use with All HO cars from Tjets to 6 ohm magnet cars operating up to 24V but is best between 12-20V.  Cars in the range of the controller include, 6 ohm Tyco, Tomy, LifeLike, Wizzard, Slottech and Viper cars, all OS3 TFX, Autoworld and DASH cars, Mega G, and all vintage Tyco and Aurora cars.   It features all of the basics of the Pro Series controllers.  It has 38" of color matching 16ga super flexible silicone wire outside the handle connected to color matching insulators over steel clips.   Designed to handle rough use, the fuse and Sensitivity knob are tucked into the handle and are not as susceptible to drops.   The color-coded wire makes it easier to ensure the correct wire makes it to the correct post.   The absence of a Brake Pot means no brakes to blow when hooked up wrong.   These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your ALL Pro.   It features the following Controls:

Adjustable Sensitivity   Provides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V.

On/Off Brakes Brakes are available when the RED wire is connected.