Viper 2.4 Ohm High Speed Armature

All new Viper High Speed modified armature. This is a high horsepower production armature for road racing applications with Pro-10™ traction magnets and PST slipon tires.  Makes a good drag motor too.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

• High Speed 2.4 ohm
• Looks Stock
• Drop in replacement for SG+, V1, BSRT G cars
• Low cost
• FAST FAST FAST

Viper Scale Racing 2.8 ohm HighSpeed Armature for Wizzard, Slottech, Super III,

Tyco/Mattel,  Mega-G

All new VSR High Speed armature for Wizzard and Tyco. This is a High Speed 2.8 ohm production armatures for road racing applications with and Pro-4™ and Pro-10™ magnets.  Pro-8™ motor magnets can be used but will add stress to the equation.  The armatures drop-in fit for Wizzard Storm, Slottech  and Auto World Super III cars.  Can be used in Tyco 440 and Mattel HPx2 with shortened pinion shaft by .20". Also work in the older Tomy Mega-Gs with the pinion shaft shortened by .08". Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

NOTE: Does not work in Wizzard Fusion car.

• 2.8 Ohm Class
• Stock red wire, narrow gap, folded tab
• Drop in replacement for Wizzard, Slottech
• Low cost
• FAST FAST FAST

Viper 3.5 Ohm Dynamically Balanced Short Shaft Armatures for JAG and Mega-G

Viper Hot 3.5 Ohm armature. The armature can be used in JAG and Mega-G cars.  These Mega-G chassis are the original release chassis - not the current can motor + car. 

Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

• High Horsepower 3.5ohm
• Dynamically Balanced - not glued or epoxied
• Drop in replacement for JAG and the legacy Mega-G cars
• FAST FAST FAST

Viper 3.5 Ohm High Speed Armatures for Wizzard, Slottech, Tyco 440

Viper hot 3.5 Ohm modified armature. The armatures can be used in Wizzard, Slottech, and Tyco 440.  Also works in the first generation Tomy Mega-G with the tail shaft shortened by .08". Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you.  Direct replacement for the discontinued Mattel 3.5 ohm HPx2 armatures. 

NOTE: Does not work in Wizzard Fusion car. 

• High Horsepower 3.5ohm
• Looks stock
• Drop in replacement for Tyco, Wizzard, Slottech cars
• FAST FAST FAST

Viper 32.5G 0.75 Ohm Turbo-EXT NXS Hi-Temp Dynamically Balanced Extended Shaft High Speed Armature

All new Viper Turbo-EXT NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM. Dynamically balanced, tool-post ground stack laminations, epoxied windings, trued comms. These 33 gage arms average 0.75 ohms. 

Turbo-EXT model has a 1.5mm extended pinion shaft.  Shaft is also a higher grade and harder material than standard.  Extended shaft makes it easier to to solder on metal pinion gears.  Shaft may need to be cut back for plastic pinion gear fitment. 

For road racing, Pro-42 Neo motor magnets and Pro-52 Traction Magnets are recommended. The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

Includes Scale Engineering front Teflon washer and .010" stainless steel spacer.

• High Speed 0.75 ohm Light Weight Lamination Design
• Epoxied, Ground Lamination Stacks, Trued Commutator
• Dynamically Balanced
• Drop in replacement for SG+, V1, BSRT G cars
• Great Speed Value
• FAST FAST FAST

Viper 34.5G 1.0 Ohm Turbo-EXT NXS Hi-Temp Dynamically Extended Shaft Balanced High Speed Armature

All new Viper Turbo-EXT NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM. Dynamically balanced, tool-post ground stack laminations, epoxied windings, trued comms. These 34 gage arms average 1.0 ohms. 

Turbo-EXT model has a 1.5mm extended pinion shaft.  Shaft is also a higher grade and harder material than standard.  Extended shaft makes it easier to to solder on metal pinion gears.  Shaft may need to be cut back for plastic pinion gear fitment. 

For road racing, Pro-10, Pro-25 Cobalt, or Pro-33 Neo motor magnets and Pro-52 Traction Magnets are recommended. The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

Includes Scale Engineering front Teflon washer and .010" stainless steel spacer.

• High Speed 1.0 ohm Light Weight Lamination Design
• Epoxied, Ground Lamination Stacks, Trued Commutator
• Dynamically Balanced
• Drop in replacement for SG+, V1, BSRT G cars
• Great Speed Value
• FAST FAST FAST

Viper 35.5G 2.0 Ohm Turbo NXS Hi-Temp Dynamically Balanced Extended Shaft High Speed Armature

All new Viper Turbo NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM. Dynamically balanced, tool-post ground stack laminations, epoxied windings, trued comms. These 35.5 gage arms average 2.0 ohms. 

For road racing, Pro-10 Motor and Pro-25 Traction Magnets are recommended. The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.  

• High Speed 2.0 ohm Light Weight Lamination Design
• Epoxied, Ground Lamination Stacks, Trued Commutator
• Dynamically Balanced
• Drop in replacement for SG+, V1, BSRT G cars
• Great Speed Value
• FAST FAST FAST

Viper 35G 1.5 Ohm Turbo NXS Hi-Temp Dynamically Balanced High Speed Armature

All new Viper Turbo NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM. Dynamically balanced, These 35 gage arms average 1.5 ohms. 

For road racing, Pro-10 Motor and Pro-35 Traction Magnets are recommended. The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+.

Includes Scale Engineering front Teflon washer and .010" stainless steel spacer.

• High Speed 1.5 ohm Light Weight Lamination Design
• Dynamically Balanced
• Drop in replacement for SG+, V1, BSRT G cars
• Great Speed Value
• FAST FAST FAST

Viper 35G 1.5 Ohm Turbo NXS Hi-Temp High Speed  Stock Armature

for Viper, BSRT, Tomy Super G Plus

All new Viper Turbo NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM.  These 35 gage arms average 1.5 ohms. 

For road racing, Pro-10 Motor and Neo Traction Magnets are recommended. The High Speed armature can be used in the Viper V-1, BSRT G-3, and Tomy Super G Plus.  

• High Speed 1.5 ohm Light Weight Lamination Design
• Drop in replacement for Viper and BSRT
• Great Speed Value
• FAST FAST FAST

Viper 36G 2.5 Ohm Turbo NXS Hi-Temp High Speed  Balanced Armature

for Viper, BSRT, Tomy Super G Plus

All new Viper Turbo NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM.  These 36 gage arms average 2.5 ohms.  Economy Dynamic Balanced Armature - not glued, not tool post ground. 

For road racing, Pro-10 Motor and Traction Magnets are recommended. The High Speed armature can be used in the Viper V-1, BSRT G-3, and Tomy Super G Plus.  

• High Speed 2.5 ohm Light Weight Lamination Design
• Drop in replacement for Viper and BSRT
• Great Speed Value
• FAST FAST FAST

Viper 36G 2.5 Ohm Turbo NXS Hi-Temp High Speed  Stock Armature

for Viper, BSRT, Tomy Super G Plus

All new Viper Turbo NXS Hi-Temp High Speed modified armatures with powder coated lamination stacks and Bakelite commutators. New design laminations for High RPM.  These 36 gage arms average 2.5 ohms. 

For road racing, Pro-10 Motor and Traction Magnets are recommended. The High Speed armature can be used in the Viper V-1, BSRT G-3, and Tomy Super G Plus.  

• High Speed 2.5 ohm Light Weight Lamination Design
• Drop in replacement for Viper and BSRT
• Great Speed Value
• FAST FAST FAST