Magnets > Magnets - Viper, BSRT, Tomy AFX

HCS AMG - Ceramic Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - 2 Pairs

HCS AMG Ceramic Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

TWO pairs of magnets.  These are the real deal ferrite Ceramc motor magnets. Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  Equal or better in every measure to the late model factory Tomy parts. These magnets are very consistent for size and strength.  No more sorting piles of old Tomy Super G+ motor magnets to find a set that fits propertly for you Viper V-1 and BSRT G-3R cars. 

 

$19.95
HCS AMG Rear Weight Set for Viper V1 Viper-Jet & BSRT G3-R Cars

 HCS AMG Rear Weight Set for Viper V1 Viper-Jet and BSRT G3-R Cars

One set of rear weights.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Weights are molded copper.  Car for example only and not included.

 

$4.49
HCS AMG Tomy Turbo & Bulldog Racing BDR Pro-10™ Traction Magnet Bar

Pro-10™ Traction Magnet Bar for Tomy Turbo and Bulldog racing BDR Cars

One magnet bar.  These are Level 10 traction magnet bars specifically made to fit Tomy Turbo and Bulldog Racing BDR cars.  A great upgrade from the weak factyory ceramic traction magnet bar on a Tomy Turbo.    Add a set of quality after-market slip-on tires and Turbo can be fun to run !!!

  

$4.95
HCS AMG Tomy Turbo, SRT & Bulldog Racing BDR Neo Traction Magnet Holders - 3 Each

Neo Traction Magnet Holders for Tomy Turbo, SRT and Bulldog Racing BDR Cars

Three magnet holders.  These are traction magnet holders specifically made to fit Tomy Turbo, SRT and Bulldog Racing BDR cars.  

A great upgrade from a Tomy Turbo - turns it into an SRT.   Use original Tomy SRT magnets or the Pro-35 Neo magnets for BDR cars.  

Magnets and car not included - for displae only. 

NOTE: Magnet for Tomy Mega-G or Mega-G + are too small to work in these parts. 

$4.95
Tomy Mega-G - AMG Pro-52™ Neo Traction Magnets

Tomy Mega-G - AMG Pro-52™ Traction Magnets

You get One pair of magnets. These magnets are a 'drop-in' for a Tomy Mega-G chassis.  They can be installed oriented in either high or low downforce.  You about can't tell by looking at the car that you're running these critters.  It'll make your car really unfair!!

The Mega-Gs have always needed more 'magnets' - so here they are.  With the right size tires they give your Mega-G 40% more applied downforce.  These will make your Mega-G actually fun to run.

 
 

 

$3.95
Tomy Mega-G Plus - AMG Pro-42™ Neo Traction Magnets

Tomy Mega-G+ Cars - AMG Pro-42™ Traction Magnets

You get One pair of magnets. These magnets are a 'drop-in' for a Tomy Mega-G+ chassis.  They can be installed oriented in either high or low downforce.  You about can't tell by looking at the car that you're running these critters.  It'll make your car really unfair!!

The Mega-G+s need a bit more 'magnets' - so here they are.  With the right size tires they give your Mega-G+ 25% more applied downforce.  These will make your Mega-G+ actually fun to run.

 
 

 

$3.95
Tomy SRT & Bulldog BDR - HCS AMG Pro-35™ Neo Traction Magnets

Tomy SRT & Bulldog Raing BDR - HCS AMG Pro-35™ Traction Magnets

You get One pair of magnets. These magnets are a 'drop-in' for a Tomy SRT and Bulldog Racing BDR chassis. 
 
They can be installed oriented in either high or low downforce. 
 
NOTE: These are too large to fit Tomy Mega-G or MegaG+

 

 
 

 

$3.49
Viper Scale Racing - Ceramic Traction Magnets for Viper V1 & BSRT G3-R Cars - Super Stock

Ceramic Traction Magnets for Viper V1™,  BSRT G3-R

One pair of magnets.  These are the real deal ferrite Ceramc traction magnets. Specifically made to fit Viper V1™ and BSRT G3-R cars. These magnets are very consistent for size and strength.   

Chassis for display and not included. 

 

$23.99
Viper Scale Racing - Pro-10™ Black Diamond 1/2 Height Traction Magnets for Tomy Super G Plus, Viper V1 & BSRT G3-R

Black Diamond™ Pro-10™ Traction Magnets 1/2 Height for Tomy Super G Plus
One pair of magnets.  These are the real deal Level 10 grade compression molded full-width magnets.  Specifically made to fit Tomy Super G Plus cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub. 15% stronger than factory SGP traction magnets. 

 These will also fit a Viper V1™, BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "R" notch. 

$5.95
Viper Scale Racing - Pro-10™ Full-Height Traction Magnets for Viper V1 and BSRT G3-R Cars - HOPRA Approved

Full-Height Pro-10 Traction Magnets for Viper V1™ and BSRT G3-R
 

One pair of magnets.  These are the real deal Level 10 grade compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub.  HOPRA Approved for the Level 10 Poly Mod class. 

 

$7.95
Viper Scale Racing - Pro-10™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-10TM Poly Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are the real deal Level 10 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved for the level 10 poly mod class. 

 

$11.95
Viper Scale Racing - Pro-25™ Raptor Cobalt Light Weight Motor Magnets for Viper V1, BSRT G3-R, Tomy Super G Plus

Pro-25™ Raptor Cobalt Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal light weight design Level 25 Cobalt  motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of restricted open road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 35 Spinner and have a good power supply and controller.   

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

$26.95
Viper Scale Racing - Pro-25™ Raptor Cobalt Traction Magnets for Viper V1, BSRT G3-R & Tomy SG+ Cars

Pro-25™  Raptor Cobalt Traction Magnets for  Viper V1 and BSRT G3-R

You get One pair of magnets.  These are 1/2 height, full width Cobalt Level 25 magnets .  Specifically made to fit Viper V1™ and BSRT G3-R cars. Also fits Tomy Super G Plus.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" or Viper PST 'Rock' on a quality aftermarket double flanged hub. 

These will fit a  Viper V1™ and BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "G" notch.   Testing on  a Wizzard Scorpion track in a BSRT G3-R  3 ohm Modified cars shows zero performance difference when compared to the now discontinued factory machined BSRT Level 25 magnets.  

$18.95
Viper Scale Racing - Pro-33™ Eagle Neo Motor Magnets for Viper V1, BSRT G3-R, Tomy Super G Plus

Pro-33™ Eagle Neo Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal light weight design Level 33 neo full-arc motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of low ohm armature drag racing cars.  Use only in Viper firm or stiff, BSRT stiff or super stiff, and Tomy SG+ black chassis.  You will need to use a low ohm armature 1.5 ohms or lower and have a good power supply and controller.   

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

$24.95
Viper Scale Racing - Pro-33™ Falcon Neo Light Weight Motor Magnets for Viper V1, BSRT G3-R, Tomy Super G Plus

Pro-33™ Falcon Neo Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  They have a smooth field with less 'cog' in the armature. 

Magnets have crisp, sharp edges that project more gauss to the rails. Drag racers may find they could achieve enough downforce with these motor magnets that weaker traction magnets or no traction magnets at all could be run.  

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

$29.95
Viper Scale Racing - Pro-42™ Titian Neo High-Downforce Light Weight Motor Magnets for Viper V1, BSRT G3-R, Tomy Super G Plus

Pro-42™ Titian Neo High-Downforce Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 34 Spinner and have a good power supply and controller. They have a smooth field with less 'cog' in the armature. 

High Downforce magnets have crisp, sharp edges that project more gauss to the rails than our other light weight HT neo magnets.  This may require a taller set up for road racing.  

Drag racers may find they could achieve enough downforce with these motor magnets that weaker traction magnets or no traction magnets at all could be run.  

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

$36.95
Viper Scale Racing - Pro-42™ Titian Neo Low-Downforce Light Weight Motor Magnets for Viper V1, BSRT G3-R, Tomy Super G Plus

Pro-42™  Titian Neo Low Downforce Light Weight Hi-Temp Motor Magnets

for Viper V1, BSRT G3-R, Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 34 Spinner and have a good power supply and controller. They have a smooth field with less 'cog' in the armature. 

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

$36.95
Viper Scale Racing - Pro-4™ Full-Height Traction Magnets for Viper V1 and BSRT G3-R Cars - HOPRA Approved

Full-Height Pro-4 Traction Magnets for Viper V1™ and BSRT G3-R

One pair of magnets.  These are the real deal Level 4 ('ceramic grade') compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  It is recommend that you run "A" compound slip-on Super Tires on a quality aftermarket hub.  Equal in every measure to the factory part.  HOPRA Approved for level 4 cars. 

 

$5.95
Viper Scale Racing - Pro-4™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-4 Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

 

$9.95
Viper Scale Racing - Pro-52™ Titian Neo Traction Magnets for Viper V1, BSRT G3-R & Tomy SG+ Cars

Pro-52™ Titan Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 52 Neo.  Specifically made to fit  Viper V1™, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run DeRosa "Rock" tires.

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use the top shims. You can NOT run these in a Viper V1 or BSRT G-3R flexible and medium chassis - Only a stiff chassis should be used. 

Can be used in building up a HOPRA legal Drop-In Neo Class Car. 

   

 

$22.95
Viper Scale Racing Magnet Top Shims

Viper Magnet Top Shims

Four pairs of shims.  These shims are use on top of 'half height' traction magnets for Viper V1 and BSRT G3-R chassis. 

Magnet Applications:  Black Diamond Pro-10, Pro-25 Cobalt, Pro-35 Silver Bricks, Pro-52 Neo. 

 
 

$3.95