Super 7, BDR Bulldog, Tomy SG +, SRT, Turbo Parts

Hard Body Clip for HCS AMG Super 7 to run Auto World Super III Bodies

 Auto World Super III Style Hard Body Clip for HCS AMG Super 7

One each clip for a Super 7 chassis to run Auto World Super III hard bodies.  Clips are 3-D printed.  Bodies and chassis NOT included - for display only.

Put the front axle into the fartherist front axle holes. This is the 1.7" wheelbase setting. 

Use axle sets and hubs that would work on a Tyco 440x2 Wide-Pan to get the look and ride height correct. 

 

 

 

$3.95
Hard Body Clip for Viper V1, BSRT G3, HCS Super 7, Tomy Super G Plus - Low Rider Style

 Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 

 

 

$2.74
Hard Body Clip for Viper V1, BSRT G3, HCS Super 7, Tomy Super G Plus - Standard Tomy SG+ Style

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original.

Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 

 

 

$2.49
HCS AMG Rear Axle Set with 23T Super Tough Crown Gear

HCS AMG Pro-Trax™ Rear Axle Set with 23T Super Tough Crown Gear

You get one (1) rear axle set:  HCS 23T Super Tough Crown Gear and T-Boss on HCS stainless steel axle.  These can be run in Tomy Mega-G and Mega-G+ cars.   

Axle set can be utilized in many modern HO slot cars with appropriate rear rims and tires.  This axle is the standard axle used on HCS built Bulldog and Super 7 Drad Racing chassis. 

Crown will mesh with HCS AMG black and orange 7T pinion gears as well as Viper, BSRT, and Tomy 7T pinion gears. 

T-Boss will need to be pulled out some if 8T pinion gears are used.  

 

 

$7.49
HCS AMG - 6 Ohm Econo Dynamically Balanced Pro Stock Armature for Viper V1, BSRT G3, & Tomy SG+

HCS AMG 6 Ohm Econo Factory Dynamically Balanced Stock Armature

These stock armatures are factory machine dynamically balanced to 10 mg.  Road racing applications with Pro-4™ traction magnets and PST slipon tires or all ceramic cars with silicone sponge tires. Can be run with Pro-10 traction magnets with hard slip-on tires.  These arms average 6.00 ohms.  The armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck.

  • Stock 6 ohm class armature
  • Factory Machine Dynamically Balanced using the additive method
  • Drop in replacement for SG+, V1, BSRT G cars
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$9.95
HCS AMG - Ceramic Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - 2 Pairs

HCS AMG Ceramic Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

TWO pairs of magnets.  These are the real deal ferrite Ceramc motor magnets. Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  Equal or better in every measure to the late model factory Tomy parts. These magnets are very consistent for size and strength.  No more sorting piles of old Tomy Super G+ motor magnets to find a set that fits propertly for you Viper V-1 and BSRT G-3R cars. 

 

$19.95
HCS AMG - Motorbrush Endbell Brush Arm Assemblies - 3 Pairs

HCS AMG - Super 7 Motorbrush Endbell Brush Arm Assemblies

All new HCS AMG Super 7 brush arms for endbell assemblies that fit Viper, BSRT, Super 7, and Mabuchi endbells. These brush arm assemblies have large contact patch Big Foot brushes and replace the arm assemblies in Viper, BSRT, Super7, and Mabuchi (Tomy Super G Plus) endbells.  These brush arms also will retro fit Mabuchi can motors that were used in Tomy Turbo, SRT, and similar cars.  You get 3 sets of parts.

Rreplacing the brush arms requires tought and skill.  There are no instructions for this operation.

 

 

 

 

$3.75
HCS AMG 6 Ohm Stock Super 7 Motor Assembly for HCS Super 7, Tomy Turbo & SRT, Bulldog Racing BDR

HCS AMG Stock 6 Ohm Super 7  Can Motor Assembly

Brand new production run 6 ohm Can Motors.  This is a  motor assembly has a standard production 6 ohm Viper armature with ceramic magnets.  The motor magnet designed offers a "high downforce" over the Mabuchi style motor.  The motor magnet 'steps' interact with the track rails the same way as the standard Viper magnets do in in a V-1 chassis. 

Motor brushes are "Big Foot" size for superior current flow.  The stock motor can be used in the Tomy Turbo and SRT chassis.  


 

  

$9.95
HCS AMG Pro Recessed Pickup Shoe Hangers for HCS Super 7, Tomy SGP, SRT, Turbo, Bulldog, Viper, BSRT - 3 sets

HCS AMG Pro Recessed Pickup Shoe Hangers - 3 Set

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

  • Recessed Hinge Point
  • Solder Dimple
  • Lighter
  • Faster
  • Easy to install
$5.95
HCS AMG Silicone Slip-On FRONT Tire for Super 7 SC and Bulldog LX cars

HCS AMG Front Tires for Super 7 SC & Bulldog LX

You get 1 pairs of tires.  Perfect replacement for lost or damaged front tires.  

Size is .384" as measured mounted on the stock HCS .275" front rim.  

Chassis for display and NOT included.  

$1.95
HCS AMG Silicone Slip-On Medium Rear Tires - Super 7 SC & Bulldog LX - .448 Black

HCS AMG Silicone Slip-On Medium Compound

.448 OD  Black for Super 7 SC & Bulldog LX

One pair of tires.  Sized for the standard .287" HCS AMG rear rims for Super 7 SC and Bulldog LX.  If mounted on Viper .265 double flanged hubs, net size is approximately .432 OD.     

They can be used on other rim configurations. Finished cars are not included - for example only. 

$2.74
HCS AMG Single Flanged Front and Rear Hub Sets - YELLOW CNC Machined

HCS AMG Single Flanged Front and Rear Hub Sets Yellow CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

 

(axles  

$8.49
HCS AMG Single Flanged Front and Rear Hub Sets w/ Front Axle & Front Tires - BLACK CNC Machined

HCS AMG Single Flanged Front and Rear Hub Sets Black CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

 

(axles  

$8.49
HCS AMG Single Flanged Front and Rear Hub Sets w/ Front Axle & Front Tires - BLUE CNC Machined

HCS AMG Single Flanged Front and Rear Hub Sets Blue CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

 

(axles  

$8.49
HCS AMG Single Flanged Front and Rear Hub Sets w/ Front Axle & Front Tires - RED CNC Machined

HCS AMG Single Flanged Front and Rear Hub Sets Red CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axles and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

 

(axles  

$8.49
HCS AMG Single Flanged Front and Rear Hub Sets w/ Front Axle & Front Tires - WHITE CNC Machined

HCS AMG Single Flanged Front and Rear Hub Sets White CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

 

(axles  

$8.49
HCS AMG Standard Grade Guide Pins for HCS Super 7, Viper V1, BSRT G3, BDR Bull Dog, and Tomy Cars - 3 Each

HCS AMG Standard Grade Guide Pins

3 Each . They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  These guide pins are standard grade made from high quality stainless stee. 

 

 

$4.95
HCS AMG Stock Super 7 Motor Assembly w/o Armature for HCS Super 7, Tomy Turbo & SRT, Buldog Racing BDR

HCS AMG Stock 6 Ohm Super 7  Can Motor Assembly without Armature

Brand new production run Can Motor housings.  This is a  motor housing assembly has standard production ceramic magnets.  The motor magnet designed offers a "high downforce" over the Mabuchi style motor.  The motor magnet 'steps' interact with the track rails the same way as the standard Viper magnets do in in a V-1 chassis. 

Motor housing is ready for you to install any Viper 'endbell timed' armature for your custom needs.  You will need an endbell brush arm spreading tool to install armatures without damaging the motor brushes.  

Motor brushes are "Big Foot" size for superior current flow.  The stock motor can be used in the Tomy Turbo and SRT chassis.  


 

  

$4.95
HCS AMG Stock Super 7 Motor Endbell Assembly

HCS AMG Stock Super 7  Can Motor Endbell Assembly 

Brand new production run Can Motor Endbell assembly.  Motor endbell can be retro-fitted to any Mabuchi Tomy style can motor.  You will need an endbell brush arm spreading tool to install armatures without damaging the motor brushes.  

Motor brushes are "Big Foot" size for superior current flow.  The stock motor can be used in the Tomy Turbo and SRT chassis.  


 

  

$3.95
HCS AMG Super 7 - Pro-10™ Full-Height Traction Magnets for Super 7 Chassis

Full-Height Pro-10 Traction Magnets for  HCS AMG Super 7
 

One pair of magnets.  These are the real deal Level 10 grade compression molded full-width full-height magnets.  Specifically made to fit HCS AMG Super 7 cars.  It is recommend that you run slip-on tires of an OD at .450" or so on quality aftermarket hubs to provide enough track clearance so the armature does not overheat.  

 

$7.95
HCS AMG Super 7 - Pro-6™ Full-Height Traction Magnets for Super 7 Chassis

Full-Height Pro-6 Traction Magnets for  HCS AMG Super 7
 

One pair of magnets.  These are the real deal Level 6 grade compression molded full-width full-height magnets.  Specifically made to fit HCS AMG Super 7 cars.  It is recommend that you run medium compound slip-on tires of an OD at .432" or so on quality aftermarket hubs.

 

$6.95
HCS AMG Super 7 Standard Chassis

HCS AMG Super 7 Standard Chassis

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium chassis with magnet clip.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

Additional photos show the various clips that can be utilized as well as the installation of aluminum lexan body posts. 

Clips and posts are NOT included and are only for refereance.

 

 

$7.77
HCS AMG Tomy Style .008 Pick-Up Shoe Springs for HCS Super 7, BDR Bulldog, Turbo, SRT, & Super G Plus - 5 Sets
New Tomy Style Standard Pick-Up Shoe Springs
 for Turbo, SRT, and Super G Plus

5 Pairs of .008 pickup shoe springs.  Can be used in Viper V-1 and BSRT G3-R cars.
 
New run of reproduection springs.   
 


 

$3.75
HCS AMG Tomy Style Pick-Up Shoes for Super 7, BDR Bull Dog, Turbo, SRT, & Super G Plus - 3 Sets
New Tomy Style Standard Pick-Up Shoes 
 for Super 7, BDR Bull Dog, Turbo, SRT, and Super G Plus

3 Pairs of shoes.  New run of reproduection shoes.   
 


 

$3.95
HCS AMG Tomy Turbo & Bulldog Racing BDR Pro-10™ Traction Magnet Bar

Pro-10™ Traction Magnet Bar for Tomy Turbo and Bulldog racing BDR Cars

One magnet bar.  These are Level 10 traction magnet bars specifically made to fit Tomy Turbo and Bulldog Racing BDR cars.  A great upgrade from the weak factyory ceramic traction magnet bar on a Tomy Turbo.    Add a set of quality after-market slip-on tires and Turbo can be fun to run !!!

  

$4.95
HCS AMG Tomy Turbo, SRT & Bulldog Racing BDR Neo Traction Magnet Holders - 3 Each

Neo Traction Magnet Holders for Tomy Turbo, SRT and Bulldog Racing BDR Cars

Three magnet holders.  These are traction magnet holders specifically made to fit Tomy Turbo, SRT and Bulldog Racing BDR cars.  

A great upgrade from a Tomy Turbo - turns it into an SRT.   Use original Tomy SRT magnets or the Pro-35 Neo magnets for BDR cars.  

Magnets and car not included - for displae only. 

NOTE: Magnet for Tomy Mega-G or Mega-G + are too small to work in these parts. 

$4.95
Life Like Hard Body Clip for HCS Super 7, Viper V1, BSRT G3, Tomy Super G Plus

 Life Like Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Life Like hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Life Like bodies onto  HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 

 

 

$3.49
Mabuchi 6 Ohm Stock Motor Assembly for Tomy Turbo & SRT, Bulldog Racing BDR

Mabuchi Stock 6 ohm Can Motor Assembly

New Old Stock Mabuchi 6 ohm Can Motor.  This is a  motor assembly has a standard production 6 ohm armature ceramic magnets.  The stock motor can be used in the Tomy Tubo and SRT chassis.  It is also the standard motor used in the new Bulldog Racing BDR cars. 


 


 

$6.95
Tyco 440x2 Wide-Pan Hard Body Clip for Super 7, Viper V1, BSRT G3, Tomy Super G Plus

Tyco 440x2 Wide-Pan Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Tyco 440x2 Wide-Pan hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Tyco 440x2 Wide-Pan bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 

 

 

$3.49
Viper - 2.4 Ohm Balanced HOT High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

Viper 2.4 Ohm Balanced High Speed Armature

All new Viper Balanced High Speed modified armature. This is a high horsepower production armature for road racing applications with Pro-10™ traction magnets and PST slipon tires.  Makes a good drag motor too.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

  • High Speed 2.4 ohm
  • Dynamically Balanced - not glued or epoxied
  • Drop in replacement for SG+, V1, BSRT G cars
  • Low cost
  • FAST FAST FAST

 


 

$13.95
Viper Scale Racing - .008 Pro Pickup Shoe Springs - 4 Sets

Viper Scale Racing .008 Pro Pickup Shoe Springs - 4 Sets

VSR .008" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.

These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.

$2.95
Viper Scale Racing - Endbell Assembly - Big Brush w/ HCS AMG Pro Bronze Bushing

Viper Scale Racing Big Brush Motorbrush Endbell Assembly

All new VSR Big Brush endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Standard HCS AMG machined bronze bushing installed. 

This is a great stock replacement part or even a upgrade over stock.

  • Arched Shoe Hanger Contacts
  • 20% more brush contact area
  • Machined Bronze Bushing
$11.95
Viper Scale Racing - Endbell Assembly - Big Brush w/ Standard Bronze Bushing

Viper Scale Racing Big Brush Motorbrush Endbell Assembly

All new VSR Big Brush endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Standard HCS AMG machined bronze bushing installed. 

This is a great stock replacement part or even a upgrade over stock.

    Arched Shoe Hanger Contacts
  • 20% more brush contact area
  • Machined Bronze Bushing
$9.95
Viper Scale Racing - Endbell Assembly - Standard

Viper Scale Racing Standard Motorbrush Endbell Assembly

All new VSR standard endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Standard HCS AMG machined bronze bushing installed. 

This is a great stock replacement part or even a upgrade over stock.

  • Arched Contacts
  • All new design

 

$7.95
Viper Scale Racing - Low Profile Pickup Shoes - 1 Set

Viper Scale Racing Low Profile Pickup Shoes - 1 Set

 

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

  • Lightweight Design
  • Low Profile
  • Long High Contact Surface
  • Long Lasting
  • Faster Lap Times
  • Better Handling
$1.75
Viper Scale Racing - Motorbrush Endbell Key

Viper Scale Racing Motorbrush Endbell Key

All new VSR endbell key for V1, Super 7,. Super G+ and BSRT G cars. You get one new VSR endbell key for V1, Super G+ and BSRT G cars.   

A must-have tool to properly spread the motorbrush arms inside the endbell so that they do not get damaged installing or removing the armature

$1.25
Viper Scale Racing - Pro-10™ Black Diamond 1/2 Height Traction Magnets for Tomy Super G Plus, Viper V1 & BSRT G3-R

Black Diamond™ Pro-10™ Traction Magnets 1/2 Height for Tomy Super G Plus
One pair of magnets.  These are the real deal Level 10 grade compression molded full-width magnets.  Specifically made to fit Tomy Super G Plus cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub. 15% stronger than factory SGP traction magnets. 

 These will also fit a Viper V1™, BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "R" notch. 

$5.95
Viper Scale Racing - Pro-10™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-10TM Poly Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are the real deal Level 10 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved for the level 10 poly mod class. 

 

$11.95
Viper Scale Racing - Pro-4™ Motor Magnets for Viper V1, BSRT G3-R & Tomy Super G Plus Cars - HOPRA Approved

Pro-4 Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

 

$9.95
Viper Scale Racing - Standard Profile Pickup Shoes - 1 Set

Viper Scale Racing Standard Profile Pickup Shoes - 1 Set

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

  • Lightweight Design
  • Long High Contact Surface
  • Long Lasting
  • Faster Lap Times
  • Better Handling
$1.75
Viper Scale Racing Aluminum Body Posts for Viper V-1, BSRT G-3, Tyco Super 7 & Tomy A/FX Supe G Plus

Viper Aluminum Body Posts for Viper V-1,  BSRT G-3, Super 7 & Tomy A/FX Super G Plus

You get 1 set of 4 posts. They are a direct screw-in fit for Viper V-3, Super 7,  BSRT G3 and G3-R cars. 

They can be fitted to Tomy Super G Plus and other brands of HO slot cars with properly located and drilled chassis.  

Engineered and made from the best materials available.  

Chassis in photos for example only, not included.  BSRT G3 is left rear, Tomy SG+ is right rear, Tyco 440 Narrow in front.

$4.49
Viper Scale Racing Low Friction Pro-Grade Guide Pin for Viper V1, BSRT G3, and Tomy Cars

Viper Low Friction Pro-Grade Guide Pin

They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This professional grade guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .155 deep.  Engineered and made from the best materials available.

 

$2.49
Viper Scale Racing Razor O-Ring Front End Set for Viper V1, BSRT G3-R, Tomy Super G Plus

Vper O-Ring Front End Set for Viper V1,  BSRT G3, Tomy SG+

You get one (1) complete axle set: Hubs, O-Rings, Axle.  Get your ride slammed for best handling!!   These are the real-deal CNC machined Delrin front 'o-ring' hubs and axle sets.  .

These are designed to run in Viper V1, BSRT G3-R and Tomy Super G Plus.  Other applications can be done with different size o-rings installed.  Comes with 1 sets of .340 o-rings to get your car 'slammed'!!

Sets shipped with hubs pressed on loose.  You may need press or other proper tools to get and exact fit to your specific car.  Chassis NOT included - for display only.

 

 

$4.49