HCS AMG - Viper V1 HOPRA Spec Racer - Pro-4 6 Ohm RTR
Gen-4 Endebell, MAXI Traction Magnets
HCS AMG built Viper V1 HOPRA Spec Racer. Viper V-1 Medium chassis with medium magnet clip; HCS AMG independent front axle set, guide pin, silver plated shoe hangers, silver plated shoes and springs; Viper triple tweaked Gen-4 endbell w/ helper springs, special selcect Viper Pro-4 motor magnets, Viper Pro-4 MAXI traction magnets; HCS AMG 7T pinion gear and Viper 23T crown gear; Viper double flanged rear hubs; Viper PST .432 medium slip-on rear tires. Dynamically balanced Viper 6 ohm red wire armature. Broken in and track tested.
Car is set up for an average custom routed track such as a Viper, Bowman, TKO, Wizzard - front tires at .335 to .340" and PST medium rear tires at .432". You may have to adjust tire sizes and firmness for your track and conditions.
Viper Scale Racing V1 - "Club Modifed" 6.0 Ohm Pro-4/10 RTR
Viper V1 chassis. O-Ring front axle set. Viper Gen-4 endbell. 6.0 Ohm armature. Pro rear bushing. Pro-4 motor & Pro-10 traction magnets. 7/23 gears. Viper .250 double flanged rear hubs with HCS Firm tires. Broken in and track tested. You will need over 1 amp of power to run this car well. 340" fronts, .438" firm rears.
HOPRA Approved Chassis.
Viper Scale Racing V1 - "Mod-Lite" 3.5 Ohm Pro-4/10 Maxi RTR
Viper V1 chassis. O-Ring front axle set. Viper Gen-4 endbell. 3.5 Ohm high-speed armature. Pro rear bushing. Maxi Pro-4 motor & Pro-10 traction magnets. 7/23 gears. .250 double flanged rear hubs with HCS Firm tires. Broken in and track tested. You will need over 1 amp of power to run this car well. Fitted with 340" fronts, .438" firm rears optimized for custom routed tracks like Bowman, Viper, TKO, and Wizzard.
Viper Scale Racing V1 Pro-10 2.5 Ohm NXS Turbo Car HO Slot Car
Viper V1 Medium chassis. Quicker Engineering independent front axle set. Viper Gen-4 Tweaked endbell with helper springs. Viper 2.5 ohm NXS Turbo Dynamically Balanced armature. Pro-10 HS motor & MAXI traction magnets. 7/23 gears. Viper Hard-Spline rear axle. Shepard CMPM rear tires. Broken in and track tested.
NOTES: You will need over 1 amp of power to run this car well. Car set up with .330" fronts, .434" rears which should be a good starting place for a routed track such as a Wizzard or Viper. You will have to put on bigger tires if running on a Tomy track.
Viper Scale Racing V1 - HOPRA Slip-On Modifed 2.4 Ohm Pro-10 RTR
Viper V1 chassis. HCS AMG independent front axle set. Viper guide pin. Triple Tweaked silver plated Viper endbell with Pro Bushing. 2.4 ohm Viper Dynamically Balanced armature. Pro rear bushing. Pro-10 motor & traction magnets. 7/22 gears. Viper double flanged rear hubs with Viper Medium PSTs. Broken in and track tested. You will need over 1 amp of power to run this car well. 340" fronts, .432" rears.
HCS AMG - "Super G Pro" 6 Ohm Pro-4 RTR Slot Car
Viper V1 chassis; Viper Razor o-ring front axle set; Viper tweaked endbell, pickup shoes, hangers and springs; Pro-4 motor & traction magnets; Pro-Trax 7/23 gears and double flanged rear hubs; Super Tires slip-on rear tires. Viper 6 ohm red wire armature. Broken in and track tested.
Ready to install a standard Tomy SG+ hard body clip to run most Tomy bodies. Lots of older Aurora bodies for Magna-Traction can work as well as newer Auto World X-Traction bodies.
Can be used in Bracket Drag Racing.
AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.
Viper Scale Racing V1 - V-Spec™ Pro-4 6 Ohm RTR
All Viper parts car! Viper V1 Medium chassis; Viper Razor o-ring front axle set; Viper guide pin; Viper tweaked endbell, pickup shoes, hangers and springs; Pro-4 motor & traction magnets; Pro-Trax 7/23 gears and Viper double flanged rear hubs; Viper PST medium slip-on rear tires. Viper 6 ohm red wire armature. Broken in and track tested.
Founders' Limited Edition
Founders' Limited Edition HO High Performance Slot Car. It's been 10 years since Viper released it's V-1 Chassis. The original production run of chassis had and open, through feature for the logo on the rear of the chassis. Later production runs changed the rear logo to a releif feature. These limited build cars are assembled using original chassis from the 'hoarder's bunker' inventory.
Viper V-1 Medium chassis; HCS O-Ring Independent front axle set with .340 tires. Viper triple tweaked endbell. HCS AMG pickup shoes, hangers and springs. Viper motor & Maxi traction magnets. Viper 7/23 gears, Hard-Spline rear axle and .250 double flanged rear hubs. Viper PST Albino .428 firm slip-on rear tires. Viper 6 ohm factory balanced red wire armature. Broken in and track tested. HOPRA Approved Chassis. Car setup is optimized a custom routed track such as a Bowman, Viper, TKO, and Wizzard.
Spend $150.00 or more on select items to receive FREE Shipping for orders to United States.
Spend $200.00 or more and get an extra 5% discount on the entire order !!! 