Auto World Super III Style Hard Body Clip for HCS AMG Super 7

One each clip for a Super 7 chassis to run Auto World Super III hard bodies.  Clips are 3-D printed.  Bodies and chassis NOT included - for display only.

Put the front axle into the fartherist front axle holes. This is the 1.7" wheelbase setting. 

Use axle sets and hubs that would work on a Tyco 440x2 Wide-Pan to get the look and ride height correct. 

 Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original.

Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

HCS AMG Pro-Trax™ Rear Axle Set with 23T Super Tough Crown Gear

You get one (1) rear axle set:  HCS 23T Super Tough Crown Gear and T-Boss on HCS stainless steel axle.  These can be run in Tomy Mega-G and Mega-G+ cars.   

Axle set can be utilized in many modern HO slot cars with appropriate rear rims and tires.  This axle is the standard axle used on HCS built Bulldog and Super 7 Drad Racing chassis. 

Crown will mesh with HCS AMG black and orange 7T pinion gears as well as Viper, BSRT, and Tomy 7T pinion gears. 

T-Boss will need to be pulled out some if 8T pinion gears are used.  

Harden Creek Slot Cars - Low Profile Pickup Shoes - 10 Sets

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 3 Sets

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 5 Sets

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 10 Sets - Silver Plated

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Silver Plated
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 3 Sets - Silver Plated

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Silver Plated
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 5 Sets - Silver Plated

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Silver Plated
• Faster Lap Times
• Better Handling

HCS AMG Front and Rear Armture Bushing

One each front (endbell) and rear machined armature bushing.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front and Rear Armture Bushings

Three each front (endbell) and rear machined armature bushings.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front and Rear Armture Bushings

Five each front (endbell) and rear machined armature bushings.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front Endbell Armature Bushing

One each front (endbell) machined armature bushing.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front Endbell Armature Bushings

Three each front (endbell) machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front Endbell Armature Bushings

Five each front (endbell) machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Complete Rear Axle Set for Life Like "M" Cars

You get one (1) complete rear axle set: Viper Double Flanged CNC cut hubs,  Life Like 23T Delrin Crown Gear, HCS AMG .438 tires.  Get your ride slammed for best handling!!   .

Chassis NOT included - for display only.  Comes with HCS AMG Life Like Delrin 7T pinion gear.  The pinion will not fit newr  Lfe Like "T" cars. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

Complete cars are for example and NOT included. 

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

Five pairs of front (endbell) and rear Oil-Lite armature bushings.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

Two each front (endbell) and rear Oil-Lite armature bushing.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

Three pairs of front (endbell) and rear Oil-Lite armature bushings.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Pro Recessed Pickup Shoe Hangers - 10 Sets - Silver Plated 

The HCS AMG Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Silver Plated
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 3 Sets - Silver Plated 

The HCS AMG Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Silver Plated
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 5 Sets - Silver Plated 

The HCS AMG Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Silver Plated
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 10 Sets

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 3 Sets

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 5 Sets

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Lighter
• Faster
• Easy to install

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gears

Ten each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gears

Three each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gear

One each 8T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Ten each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Five each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.
 

HCS AMG Rear Armature Bushings

One each Rear machined armature bushing.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Rear Armature Bushings

Three each Rear machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Rear Armature Bushings

Five each Rear machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG .025 Rear Axle Retaining Pins

These are precision made 0.025 diameter pins.  Ideal for the Viper V1 chassis.  Can be adapted to other brands of chassis and HO slot cars.  

For Viper V1 chassis, start the hole with an 0.020 bit.  Then follow up with an 0.025 bit. 

10 pins each.  
 

HCS AMG Black Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars. 

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .285" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

HCS AMG White Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .285" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Yellow CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Black CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Blue CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Red CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axles and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets White CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Delrin Front and Rear Hub Sets with Tires

You get 1 sets of narrow style injection molded Delrin front & rear hubs with tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the  tires.  Rear hubs are .285" OD and measure .448" with the tires. 

These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Stainless Steel Center Splined  Standard .059 Rear Axles

Priced for 1 each axle. These standard grade axles start with precision cut 1.15 length stainless steel stock.  Center splined to assure positive crown gear placement.  They are great replacements for any Tyco 440, Life Like, or other HO slot cars in standard applications.   
 

HCS AMG Stainless Steel Center Splined  Standard .059 Rear Axles

Price for 3 axles. These standard grade axles start with precision cut 1.15 length stainless steel stock.  Center splined to assure positive crown gear placement.  They are great replacements for any Tyco 440, Life Like, or other HO slot cars in standard applications.   
 

HCS AMG Pro-Trax™ Complete Rear Axle Set for Tomy Mega-G+ Cars

You get one (1) complete rear axle set: Viper Single Flanged CNC cut hubs, HCS 25T Crown Gear and T-Boss, Super Tires "A" for Mega-G+.  Get your ride slammed for best handling!!   .

These are designed to run in Tomy Mega-G+ cars.   

Chassis NOT included - for display only.  Comes with HCS AMG 7T pinion gear which works on the newer Mega-G+.  The pinion will not fit older Mega-G.     

 Life Like Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Life Like hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Life Like bodies onto  HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only.