Drilling of Viper Chassis for .025 Rear Axle Retaining Pins

Cost for drilling any Viper V1 chassis for .025 rear axle retaining pins.   Includes standard HCS AMG rear axle pins. 

This service is only for pining Medium, Firm, and Stiff chassis.  Flexible chassis is not offered.  

 Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original.

Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

HC Slots Aluminum Lexan Body Pins

$6.49 for 5 Sets

These are precision made aluminum lexan body pins.  Ideal for the Viper V1 and BSRT G-3R chassis.  Can be adapted to other brands of chassis and HO slot cars.  Pins will have to be cut back for use in Wizzard or Slottech cars

You 20 pins each - 5 sets.  
 

Harden Creek Slot Cars - Axle Spacers - .003

These are precision made .003 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .005

These are precision made .005 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .010

These are precision made .010 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .015

These are precision made .015 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

HCS AMG Brass Independent O-Ring Front End Set for Viper V1,  BSRT G3, Tomy SG+

CNC machined in the USA by RTHO brass front 'o-ring' hubs and axle sets.  These are designed to run in Viper V1 & BSRT G3-R for weighted or 'brass class' cars.  Other applications can be done.  Comes with 1 set of o-rings.  Different size o-rings can be fitted for fine tuning ride height.  Weight for complete set is 2 grams. 

You get one (1) complete axle set: Hubs, O-Rings, Axle.  Chassis NOT included - for display only.

 HCS Weight Set for Viper V1 Viper-Jet Cars

One set of front and rear weights.  Specifically made to fit Viper V1™ cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Front buttons are CNC brass, magnet box weights are molded copper.  Car for example only and not included.

 HCS AMG Front Weight Set for Viper V1 Viper-Jet Cars

One set of front weights.  Specifically made to fit Viper V1™ cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Front buttons are CNC brass. Car for example only and not included.

HCS AMG Complete Rear Axle Set for Life Like "M" Cars

You get one (1) complete rear axle set: Viper Double Flanged CNC cut hubs,  Life Like 25T Delrin Crown Gear, HCS AMG .438 tires.  Get your ride slammed for best handling!!   .

Chassis NOT included - for display only.  Comes with HCS AMG Life Like Delrin 7T pinion gear.  The pinion will not fit newr  Lfe Like "T" cars. 

HCS AMG Pro Recessed Pickup Shoe Hangers - 3 Set

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Solder Dimple
• Lighter
• Faster
• Easy to install

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gears

Three each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gears

Five each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions. Used by many national level racers on Super Stock and Modifed cars.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gears

Five each 7T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gear

One each 8T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Ten each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Three each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Five each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.
 

HCS AMG .025 Rear Axle Retaining Pins

These are precision made 0.025 diameter pins.  Ideal for the Viper V1 chassis.  Can be adapted to other brands of chassis and HO slot cars.  

For Viper V1 chassis, start the hole with an 0.020 bit.  Then follow up with an 0.025 bit. 

10 pins each.  
 

 HCS AMG Rear Weight Set for Viper V1 Viper-Jet and BSRT G3-R Cars

One set of rear weights.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  These weights are for building 'weighted class cars' ususaly run at 12 volts.  Weights are molded copper.  Car for example only and not included.

HCS AMG Black Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars. 

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .288" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

HCS AMG White Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .288" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

Pro-10™ Traction Magnet Bar for Tomy Turbo and Bulldog racing BDR Cars

One magnet bar.  These are Level 10 traction magnet bars specifically made to fit Tomy Turbo and Bulldog Racing BDR cars.  A great upgrade from the weak factyory ceramic traction magnet bar on a Tomy Turbo.    Add a set of quality after-market slip-on tires and Turbo can be fun to run !!!

Neo Traction Magnet Holders for Tomy Turbo, SRT and Bulldog Racing BDR Cars

Three magnet holders.  These are traction magnet holders specifically made to fit Tomy Turbo, SRT and Bulldog Racing BDR cars.  

A great upgrade from a Tomy Turbo - turns it into an SRT.   Use original Tomy SRT magnets or the Pro-35 Neo magnets for BDR cars.  

Magnets and car not included - for displae only. 

NOTE: Magnet for Tomy Mega-G or Mega-G + are too small to work in these parts. 

 Life Like Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Life Like hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Life Like bodies onto  HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Tyco 440x2 Wide-Pan Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Tyco 440x2 Wide-Pan hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Tyco 440x2 Wide-Pan bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Viper HardSpline™ Steel Center Splined  Premium .059 Rear Axles

Priced per each axle. These premium axles start with precision cut 1.15 length billet steel stock.  Center splined to assure positive crown gear placement. Axles are centerless ground, hardened, and nickel plated.  They are great replacements for any BSRT G-3, Tyco 440 car, or other HO slot cars.  
 

Viper HardSpline™ Steel Center Splined  Premium .059 Rear Axles

Price for 5 axles. These premium axles start with precision cut 1.15 length billet steel stock.  Center splined to assure positive crown gear placement. Axles are centerless ground, hardened, and nickel plated.  They are great replacements for any BSRT G-3, Tyco 440 car, or other HO slot cars.  
 

Viper Scale Racing .008 Pro Pickup Shoe Springs - 4 Sets

VSR .008" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.

These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.

Viper Scale Racing .009 Pro Pickup Shoe Springs - 4 Sets

VSR .009" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.

These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.

Viper Scale Racing .010 Pro Pickup Shoe Springs - 4 Sets

VSR .010" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.  These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.  .010 springs good for Level 10 and higher cars. 

Viper Scale Racing Big Brush Motorbrush Endbell Assembly

All new VSR Big Brush endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Standard HCS AMG machined bronze bushing installed. 

This is a great stock replacement part or even a upgrade over stock.

• Arched Shoe Hanger Contacts
• 20% more brush contact area
• Machined Bronze Bushing

Viper Scale Racing Big Brush Motorbrush Endbell Assembly

All new VSR Big Brush endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The standard Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Standard HCS AMG machined bronze bushing installed. 

This is a great stock replacement part or even a upgrade over stock.

• Arched Shoe Hanger Contacts
• 20% more brush contact area
• Machined Bronze Bushing

HCS AMG Silver Plated Viper V1 Motorbrush Endbell Assembly

Large brush style VSR Pro silver plated endbell for V1, Super G+ and BSRT G cars. This is a drop-in replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The pro Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'. Larger brushes provide 20% more contact area then the stock SG+ unit.

The HCS AMG Pro Front Bushing has a machined face that allows the armature to spin more freely. This is a great stock replacement part or even a upgrade over stock.

• Arched Contacts
• Silver Plated
• 20% more brush area than Mabuchi endbells
• HCS AMG Pro Front Bushing
• Silver plated units are Triple Tweaked for pro performance:  side contacts crimped and silver pasted,  brush arm profile increased, motor brushes are diamond tool pre-seated.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

Silver Plated Viper V1 Motorbrush Endbell Assembly - BLEMS

NOTE: These endbells are "BLEMS".  The silver plater left the parts in the 'bath' too long

and they essentally got plated too much to the point that the silver impregnated the plastic housing. 

They look stupid but they do work as normal.  The amount of 'blemish' varies from part to part.

Price is for One (1) assembly.  Large brush style VSR Pro silver plated endbell for V1, Super G+ and BSRT G cars. This is a drop-in replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The pro Viper endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'. Larger brushes provide 20% more contact area then the stock SG+ unit.

Standard bronze bushing installed. This is a great stock replacement part or even a upgrade over stock.

• Arched Contacts
• Silver Plated
• 20% more brush area than Mabuchi endbells
• Standard Bronze Bushing

Viper Scale Racing Low Profile Pickup Shoes - 1 Set

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Scale Racing Low Profile Pickup Shoes - 3 Sets

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Scale Racing Low Profile Pickup Shoes - 3 Sets - Gold Plated 

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Gold Plated

Viper Scale Racing Low Profile Pickup Shoes - 3 Sets - Silver Plated 

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Silver Plated

Viper Scale Racing Low Profile Pickup Shoes - 5 Sets - Gold Plated 

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Gold Plated

Viper Scale Racing Low Profile Pickup Shoes - 5 Sets - Silver Plated 

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Silver Plated

MAXI Full-Height Wing-Style Pro-10^™ Traction Magnets for Viper V1™ and BSRT G3-R

One pair of magnets.  These are the real deal Level 10 Maximum HOPRA Volume compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars. Magnets meet the maximum volume HOPRA rule for tracation magnets.  Wing-Style design allows more 'drift' to avoid de-slots.  It is recommended that car setup include the use of Viper PST Albino firm rear tires. 

Aplications can include an all Level 10 Modified car or hybrid 6 ohm car with level 4 motor magnets and Maxi level 10 traction magnets. Tire selection is important for maximum performance. 

MAXI Full-Height Wing-Style Pro-4^™ Traction Magnets for Viper V1™ and BSRT G3-R

One pair of magnets.  These are the real deal Level 4 Maximum HOPRA Volume compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars. A must for HOPRA Spec Racer class cars.  Magnets meet the maximum volume HOPRA rule for tracation magnets.  Wing-Style design allows more 'drift' to avoid de-slots.  It is recommended that car setup include the use of Viper PST Albino firm rear tires.  

Viper Scale Racing Motorbrush Endbell Key

All new VSR endbell key for V1, Super 7,. Super G+ and BSRT G cars. You get one new VSR endbell key for V1, Super G+ and BSRT G cars.   

A must-have tool to properly spread the motorbrush arms inside the endbell so that they do not get damaged installing or removing the armature

Viper Scale Racing Pro Recessed Pickup Shoe Hangers - 3 Sets

The Viper Scale Racing Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed Pickup Shoe Hangers - 5 Sets

The Viper Scale Racing Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed Gold Plated Pickup Shoe Hangers - 10 Sets

The Viper Scale Racing Gold Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed Gold Plated Pickup Shoe Hangers - 3 Sets

The Viper Scale Racing Gold Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed Gold Plated Pickup Shoe Hangers - 5 Sets

The Viper Scale Racing Gold Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed  Silver Plated Pickup Shoe Hangers - 10 Sets

The Viper Scale Racing Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed  Silver Plated Pickup Shoe Hangers - 3 Sets

The Viper Scale Racing Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Viper Scale Racing Pro Recessed  Silver Plated Pickup Shoe Hangers - 5 Sets

The Viper Scale Racing Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go.

The other key feature that has been added to this hanger is the hole in the top of the spring tab. This is a dual purpose feature. First it removes unneeded weight and second it provides an access hole to the spring which allows racers to add shunt wires.

• Recessed Hinge Point
• Shunt Hole
• Lighter
• Faster
• Easy to install

Black Diamond™ Pro-10™ Traction Magnets 1/2 Height for Tomy Super G Plus
One pair of magnets.  These are the real deal Level 10 grade compression molded full-width magnets.  Specifically made to fit Tomy Super G Plus cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub. 15% stronger than factory SGP traction magnets. 

 These will also fit a Viper V1™, BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "R" notch. 

Full-Height Pro-10^™ Traction Magnets for Viper V1™ and BSRT G3-R
 

One pair of magnets.  These are the real deal Level 10 grade compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub.  HOPRA Approved for the Level 10 Poly Mod class. 

Pro-10^TM Poly Hi-Torque Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are Level 10 grade compression molded Hi-Torque poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  

Hi-Torque magnets have a full closed back design that increases magnet mass.  The result is a much stronger armature magnetic field than traditional light weight back magnets. This should allow the armature to pull more load.  

Pro-10^TM Poly Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are the real deal Level 10 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved for the level 10 poly mod class. 

Pro-25™ Raptor Cobalt Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal light weight design Level 25 Cobalt  motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of restricted open road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 35 Spinner and have a good power supply and controller.   

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Pro-25™  Raptor Cobalt Traction Magnets for  Viper V1 and BSRT G3-R

You get One pair of magnets.  These are 1/2 height, full width Cobalt Level 25 magnets .  Specifically made to fit Viper V1™ and BSRT G3-R cars. Also fits Tomy Super G Plus.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" or Viper PST 'Rock' on a quality aftermarket double flanged hub. 

These will fit a  Viper V1™ and BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "G" notch.   Testing on  a Wizzard Scorpion track in a BSRT G3-R  3 ohm Modified cars shows zero performance difference when compared to the now discontinued factory machined BSRT Level 25 magnets.  

Pro-33™ Eagle Neo Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal light weight design Level 33 neo full-arc motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of low ohm armature drag racing cars.  Use only in Viper firm or stiff, BSRT stiff or super stiff, and Tomy SG+ black chassis.  You will need to use a low ohm armature 1.5 ohms or lower and have a good power supply and controller.   

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Pro-33™ Falcon Neo Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  They have a smooth field with less 'cog' in the armature. 

Magnets have crisp, sharp edges that project more gauss to the rails. Drag racers may find they could achieve enough downforce with these motor magnets that weaker traction magnets or no traction magnets at all could be run.  

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Pro-33™ Falcon Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 33 Neo.  Specifically made to fit  Viper V1™ chasis, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run custom "Rock" tires from Quicker Engineering.  

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use a top shim. You can NOT run these in a Viper V1 or BSRT flexible chassis with a flexible magnet clip.  Only medium and stiff chassis should be used.

Pro-42™ Titan Neo High-Downforce Light Weight Motor Magnets for Viper V1, BSRT G3-R,

Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 34 Spinner and have a good power supply and controller. They have a smooth field with less 'cog' in the armature. 

High Downforce magnets have crisp, sharp edges that project more gauss to the rails than our other light weight HT neo magnets.  This may require a taller set up for road racing.  

Drag racers may find they could achieve enough downforce with these motor magnets that weaker traction magnets or no traction magnets at all could be run.  

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Pro-42™  Titan Neo Low Downforce Light Weight Hi-Temp Motor Magnets

for Viper V1, BSRT G3-R, Tomy Super G Plus

One pair of magnets.  These are the real deal high temperature grade, light weight design Neo motor magnets.  Specifically made to fit Viper V1, BSRT G3-R and Tomy Super G Plus cars.  These are super strong magnets for professional building of neo modified road race cars.  Use only in Viper stiff, BSRT super stiff, and Tomy SG+ black chassis.  You will need to use a custom armature such as a 34 Spinner and have a good power supply and controller. They have a smooth field with less 'cog' in the armature. 

NOTE: Not responsible if you let these magnets get away from you and snap together, fly across your bench onto something else, have magnets fly in and snap on to these and chip a crack them.  It can be a real problem if you are not careful in your build. 

Full-Height Pro-4^™ Traction Magnets for Viper V1™ and BSRT G3-R

One pair of magnets.  These are the real deal Level 4 ('ceramic grade') compression molded full-width full-height magnets.  Specifically made to fit Viper V1™ and BSRT G3-R cars.  It is recommend that you run "A" compound slip-on Super Tires on a quality aftermarket hub.  Equal in every measure to the factory part.  HOPRA Approved for level 4 cars. 

Pro-4^™ Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

Pro-52™ Titan Neo Traction Magnets

for Viper V1™,  BSRT G3-R and Tomy Super G Plus

     One pair of magnets.  These are the real deal - Level 52 Neo.  Specifically made to fit  Viper V1™, BSRT G3-R chassis and Tomy Super G Plus cars.  These are sold as a serious hop-up part - you better have the right tires and tools to keep from frying your armature.   It is recommend that you run DeRosa "Rock" tires.

     The traction magnet clip for a Tomy SG+ must be in good shape and hold the magnets tight.  For a Viper V1™ and BSRT Scale Auto G3 chassis, use the top shims. You can NOT run these in a Viper V1 or BSRT G-3R flexible and medium chassis - Only a stiff chassis should be used. 

Can be used in building up a HOPRA legal Drop-In Neo Class Car. 

Viper Scale Racing Standard Profile Pickup Shoes - 1 Set

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Scale Racing Standard Profile Pickup Shoes - 3 Sets

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Scale Racing Standard Profile Pickup Shoes - 3 Sets - Gold Plated 

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Gold Plated

Viper Scale Racing Standard Profile Pickup Shoes - 3 Sets - Silver Plated 

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Silver Plated

Viper Scale Racing Standard Profile Pickup Shoes - 5 Sets

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Scale Racing Standard Profile Pickup Shoes - 5 Sets - Gold Plated 

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Gold Plated

Viper Scale Racing Standard Profile Pickup Shoes - 5 Sets - Silver Plated 

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling
• Silver Plated

Viper 22T Crown Gear

One each 22T Gear.  Injection molded from the best materials available.  Low profile design to save weight. Molded in tooth count markings.  Mate with Viper 7T pinion gears as well as HCS AMG 7T Delrin, Tomy, BSRT, and Tyco pinion gears.  (priced individually)

Viper 23T Crown Gear

One each 23T Gear.  Injection molded from the best materials available.  Low profile design to save weight. Molded in tooth count markings.  Mate with Viper 7T pinion gears as well as HCS AMG 7T Delrin, Tomy, BSRT, and Tyco pinion gears.  (priced individually)

Viper 23T Mega-G and Mega-G+ Crown Gear

One each 23T Gear. - made to fit Tomy Mega-G adn mega-G+.  Injection molded from the best materials available.  Low profile design to save weight. Molded in tooth count markings.  Mate with Viper 7T pinion gears as well as Tomy, BSRT, and Tyco pinion gears.  (photo shows three, but priced individually)

Viper Scale Racing 7T Pinion Gear

One each 7T Gear. Mate with Viper crown gears as well as  HCS AMG, Life Like, RPMs Grey, Tomy, BSRT, and Tyco crown gears.  (priced individually)

Viper Aluminum Body Posts for Viper V-1,  BSRT G-3, Super 7 & Tomy A/FX Super G Plus

You get 1 set of 4 posts. They are a direct screw-in fit for Viper V-3, Super 7,  BSRT G3 and G3-R cars. 

They can be fitted to Tomy Super G Plus and other brands of HO slot cars with properly located and drilled chassis.  

Engineered and made from the best materials available.  

Chassis in photos for example only, not included.  BSRT G3 is left rear, Tomy SG+ is right rear, Tyco 440 Narrow in front.

Viper Double Flanged .250 OD Machined Delrin Narrow Rear Hubs

Two pairs of  narrow style true Pro Quality precision CNC Machined Delrin Rear Hubs.  Will fit Tomy Super G Plus cars and Viper V1™ and BSRT G3 cars running full-width traction magnets and still be 'legal' over-all width. 

Works well on all brands of HO slot cars when properly installed with quality HO tire and press tools.  

(rear axle set-up in photo not included) 

Viper Double Flanged .275 OD Machined Delrin Narrow Rear Hubs

Two pairs of  narrow style true Pro Quality precision CNC Machined Delrin Rear Hubs.  Will fit Tomy Super G Plus cars and Viper V1™ and BSRT G3 cars 

running full-width traction magnets and still be 'legal' over-all width. 

Works well on all brands of HO slot cars when properly installed with quality HO tire and press tools.  

Viper Scale Racing Gear Saver - "T-Boss"

One each gear saver.  CNC machined from the best materials available.  Mate with Viper pinion and crown gears as well as Tomy, BSRT, and Tyco gears.  (photo shows three, but priced individually. Axle set for example, not included)

Viper Low Friction Pro-Grade Guide Pin

They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This professional grade guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .155 deep.  Engineered and made from the best materials available.

Viper Low Friction Pro-Grade Guide Pins

3 Each . They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This professional grade guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .155 deep.  Engineered and made from the best materials available.

Pro-Trax™ Complete Rear Axle Set for Tomy Mega-G Cars

You get one (1) complete rear axle set: Viper Single Flanged CNC cut hubs, 23T Crown Gear and T-Boss, Super Tires "A" for Mega-G.  Get your ride slammed for best handling!!   .

These are designed to run in Tomy Mega-G cars.  Other applications can be done with different size tires installed. 

Chassis NOT included - for display only.  Comes with Viper 7T pinion gear which works on Mega-G.  The pinion will not fit Mega-G +.