Drilling of Viper Chassis for .025 Rear Axle Retaining Pins

Cost for drilling any Viper V1 & V-3 chassis for .025 rear axle retaining pins.   Includes standard HCS AMG rear axle pins. 

This service is only for pining Medium, Firm, and Stiff chassis.  Flexible chassis is not offered. Super 7 is not offered.  

 Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original.

Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

 Life Like Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Life Like hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Life Like bodies onto  HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Tyco 440x2 Wide-Pan Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Tyco 440x2 Wide-Pan hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Tyco 440x2 Wide-Pan bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Viper Scale Racing V-3 Flexible Chassis

One flexible chassis with V-3 guide pin, timing bracket, and magnet clip.  Chassis will accept parts from Viper Scale Racing and Harden Creek Slot Cars. Certain other parts such as axles, gears, hubs and tires from other manufactures can be used.  Molded in lexan body posts.

The “V3” is the next evolution of our proven V1 platform—designed for racers who demand innovation, versatility, and raw performance. Still based on the race proven V1 geometry, the V3 pushes performance further while retaining full compatibility with most V1 parts. Whether you're upgrading an old favorite or building a club-level rocket, the V3 is your new go-to. Lighter. Stronger. Smarter. Faster.

Specs & Features:

• Ultra Lightweight design- Lower CG then the V1, Faster acceleration, cornering and more 
• Multiple Guide pin positions- 3 Positions including 1 behind the axle for those tight and twisty turns   
• Full Block type Traction mags- Ambidextrous design for High Downforce, Low downforce and Split Orientation
• Enhanced Rear Axle Support — Updated rear axle pin hole locators for ultra-precise pinning and bulletproof strength
• Revised Magnet Clip — Holds the middle of the magnets instead of the bottoms, Provides additional side clearance
• Ultralight Timing Bracket-  Windowed design is lightweight and stronger then V1 design

Rear axle pin hole locators- Allows easy pinning of rear axle.

Flexible chassis great for any magnets intended for Ceramic Super Stock, Spec Racer, and Weighted Class (12 volt) cars.  

Chassis is HOPRA approved.

The Next Generation of HO Racing™ is here.  

V-3 CMPM Level 10 Stepped Block Style  Traction Magnets for Viper V-3 Cars

One pair of magnets.  Specifically made to fit Viper V-3 cars for the CMPM class.  Stepped block-Style design gives you slightly more downforce so cars handle better on light rail tracks.  It is recommended that car setup include the use of Viper PST Albino firm rear tires. 

Parts are HOPRA approved.

V-3 CMPM Level 10 Block Style  Traction Magnets for Viper V-3 Cars

One pair of magnets.  Specifically made to fit Viper V-3 cars for the CMPM class.  Block-Style design allows more 'drift' to avoid de-slots.  It is recommended that car setup include the use of Viper PST Albino firm rear tires. 

HOPRA approved part. 

Level 10 Poly Hi-Speed Tipped Motor Magnets for Viper V-3 and V1, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are Level 10 grade compression molded Hi-Speed Tipped poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  

Hi-Speed Tipped magnets are designed for increased RPMs and smoother power delivery over standard Pro 10 magnets.  When utilized with the Maxi Pro-10 Wing-Style traction magnets, total downforce when measured with a White Dog meter is greater than an all-traditional magnet level 10 car. Car setup and driving style will be a bit different that the traditional magnet design setups. 

All magnet batches are precisely controlled and consistent. 

HOPRA Approved Part. 

Viper Scale Racing V-3 Medium "B" Chassis

One medium "B" black chassis with V-3 guide pin, timing bracket, and magnet clip.  Chassis will accept parts from Viper Scale Racing and Harden Creek Slot Cars. Certain other parts such as axles, gears, hubs and tires from other manufactures can be used.  Molded in lexan body posts.

The Medium "B" chassis can be slightly stiffer than the standard medium gray.  

The “V3” is the next evolution of our proven V1 platform—designed for racers who demand innovation, versatility, and raw performance. Still based on the race proven V1 geometry, the V3 pushes performance further while retaining full compatibility with most V1 parts. Whether you're upgrading an old favorite or building a club-level rocket, the V3 is your new go-to. Lighter. Stronger. Smarter. Faster.

Specs & Features:

• Ultra Lightweight design- Lower CG then the V1, Faster acceleration, cornering and more 
• Multiple Guide pin positions- 3 Positions including 1 behind the axle for those tight and twisty turns   
• Full Block type Traction mags- Ambidextrous design for High Downforce, Low downforce and Split Orientation
• Enhanced Rear Axle Support — Updated rear axle pin hole locators for ultra-precise pinning and bulletproof strength
• Revised Magnet Clip — Holds the middle of the magnets instead of the bottoms, Provides additional side clearance
• Ultralight Timing Bracket-  Windowed design is lightweight and stronger then V1 design

Rear axle pin hole locators- Allows easy pinning of rear axle.

Medium chassis great for any magnets intended for Ceramic Super Stock, Spec Racer, and CMPM.  

Chassis is HOPRA approved.

The Next Generation of HO Racing™ is here.  

Viper Scale Racing V-3 Medium "B" Chassis w/ Level 10 High Downforce Magnets

One medium "B" chassis with V-3 guide pin, timing bracket, and magnet clip.  Chassis will accept parts from Viper Scale Racing and Harden Creek Slot Cars. Certain other parts such as axles, gears, hubs and tires from other manufactures can be used.  Molded in lexan body posts. 

Includes a set of Level 10 "Stepped" traction and High Downforce motor magnts. 

The “V-3” is the next evolution of our proven V1 platform—designed for racers who demand innovation, versatility, and raw performance. Still based on the race proven V1 geometry, the V-3 pushes performance further while retaining full compatibility with most V1 parts. Whether you're upgrading an old favorite or building a club-level rocket, the V-3 is your new go-to. Lighter. Stronger. Smarter. Faster.

Specs & Features:

• Ultra Lightweight design- Lower CG then the V1, Faster acceleration, cornering and more 
• Multiple Guide pin positions- 3 Positions including 1 behind the axle for those tight and twisty turns   
• Full Block type Traction mags- Ambidextrous design for High Downforce, Low downforce and Split Orientation
• Enhanced Rear Axle Support — Updated rear axle pin hole locators for ultra-precise pinning and bulletproof strength
• Revised Magnet Clip — Holds the middle of the magnets instead of the bottoms, Provides additional side clearance
• Ultralight Timing Bracket-  Windowed design is lightweight and stronger then V1 design

Rear axle pin hole locators- Allows easy pinning of rear axle.

Medium chassis great for any magnets intended for Ceramic Super Stock, Spec Racer, and CMPM.  

Chassis and traction magnets are HOPRA  approved. Motor magnets are waiting further HOPRA evaluations.

Complete car in photo example is not included. 

The Next Generation of HO Racing™ is here.  

Viper Scale Racing V-3 Medium Chassis

One medium chassis with V-3 guide pin, timing bracket, and magnet clip.  Chassis will accept parts from Viper Scale Racing and Harden Creek Slot Cars. Certain other parts such as axles, gears, hubs and tires from other manufactures can be used.  Molded in lexan body posts.

The “V3” is the next evolution of our proven V1 platform—designed for racers who demand innovation, versatility, and raw performance. Still based on the race proven V1 geometry, the V3 pushes performance further while retaining full compatibility with most V1 parts. Whether you're upgrading an old favorite or building a club-level rocket, the V3 is your new go-to. Lighter. Stronger. Smarter. Faster.

Specs & Features:

• Ultra Lightweight design- Lower CG then the V1, Faster acceleration, cornering and more 
• Multiple Guide pin positions- 3 Positions including 1 behind the axle for those tight and twisty turns   
• Full Block type Traction mags- Ambidextrous design for High Downforce, Low downforce and Split Orientation
• Enhanced Rear Axle Support — Updated rear axle pin hole locators for ultra-precise pinning and bulletproof strength
• Revised Magnet Clip — Holds the middle of the magnets instead of the bottoms, Provides additional side clearance
• Ultralight Timing Bracket-  Windowed design is lightweight and stronger then V1 design

Rear axle pin hole locators- Allows easy pinning of rear axle.

Medium chassis great for any magnets intended for Ceramic Super Stock, Spec Racer, and CMPM.  

Chassis is HOPRA approved.

The Next Generation of HO Racing™ is here.  

Viper Scale Racing V-3 Medium Chassis w/ Level 10 Magnets

One medium chassis with V-3 guide pin, timing bracket, and magnet clip.  Chassis will accept parts from Viper Scale Racing and Harden Creek Slot Cars. Certain other parts such as axles, gears, hubs and tires from other manufactures can be used.  Molded in lexan body posts. 

Includes a set of Level 10 "Stepped" traction and extended tip motor magnts.

The “V3” is the next evolution of our proven V1 platform—designed for racers who demand innovation, versatility, and raw performance. Still based on the race proven V1 geometry, the V3 pushes performance further while retaining full compatibility with most V1 parts. Whether you're upgrading an old favorite or building a club-level rocket, the V3 is your new go-to. Lighter. Stronger. Smarter. Faster.

Specs & Features:

• Ultra Lightweight design- Lower CG then the V1, Faster acceleration, cornering and more 
• Multiple Guide pin positions- 3 Positions including 1 behind the axle for those tight and twisty turns   
• Full Block type Traction mags- Ambidextrous design for High Downforce, Low downforce and Split Orientation
• Enhanced Rear Axle Support — Updated rear axle pin hole locators for ultra-precise pinning and bulletproof strength
• Revised Magnet Clip — Holds the middle of the magnets instead of the bottoms, Provides additional side clearance
• Ultralight Timing Bracket-  Windowed design is lightweight and stronger then V1 design

Rear axle pin hole locators- Allows easy pinning of rear axle.

Medium chassis great for any magnets intended for Ceramic Super Stock, Spec Racer, and CMPM.  

Chassis and traction magnets are HOPRA  approved. Motor magnets are waiting further HOPRA evaluations.

Complete car in photo example is not included. 

The Next Generation of HO Racing™ is here.  

Viper Scale Racing V-3 Medium Chassis w/ Spec Racer Magnets

One medium chassis with V-3 guide pin, timing bracket, and magnet clip.  Chassis will accept parts from Viper Scale Racing and Harden Creek Slot Cars. Certain other parts such as axles, gears, hubs and tires from other manufactures can be used.  Molded in lexan body posts. 

Includes a set of Spec Racer # 11315 (code green) motor and HOPRA approved traction magnets.

The “V3” is the next evolution of our proven V1 platform—designed for racers who demand innovation, versatility, and raw performance. Still based on the race proven V1 geometry, the V3 pushes performance further while retaining full compatibility with most V1 parts. Whether you're upgrading an old favorite or building a club-level rocket, the V3 is your new go-to. Lighter. Stronger. Smarter. Faster.

Specs & Features:

• Ultra Lightweight design- Lower CG then the V1, Faster acceleration, cornering and more 
• Multiple Guide pin positions- 3 Positions including 1 behind the axle for those tight and twisty turns   
• Full Block type Traction mags- Ambidextrous design for High Downforce, Low downforce and Split Orientation
• Enhanced Rear Axle Support — Updated rear axle pin hole locators for ultra-precise pinning and bulletproof strength
• Revised Magnet Clip — Holds the middle of the magnets instead of the bottoms, Provides additional side clearance
• Ultralight Timing Bracket-  Windowed design is lightweight and stronger then V1 design

Rear axle pin hole locators- Allows easy pinning of rear axle.

Medium chassis great for any magnets intended for Ceramic Super Stock, Spec Racer, and CMPM.  

Chassis and traction magnets are HOPRA  approved. Viper # 11315 motor magnets are waiting futher HOPRA evaluations.

Complete car in photo example is not included. 

The Next Generation of HO Racing™ is here.  

Viper V-3 Pro-Grade Guide Pin

You get ONE guide pin. They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This professional grade guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .155 deep.  Engineered and made from the best materials available.

V-3 Spec Racer Stepped Block Style  Traction Magnets for Viper V-3 Cars

One pair of magnets.  Specifically made to fit Viper V-3 cars for the Spec Racer class.  Stepped block-Style design gives you slightly more downforce so cars may handle better on certain light rail tracks.  It is recommended that car setup include the use of Viper PST Albino firm rear tires. 

Parts are HOPRA approved.

V-3 Spec Racer Block Style Traction Magnets for Viper V-3 Cars

One pair of magnets.  Compression Molded specifically made to fit Viper V-3 cars for the Spec Racer class.  Block-Style design allows more 'drift' to avoid de-slots.  It is recommended that car setup include the use of Viper PST Albino firm rear tires. 

HOPRA approved part.

Spec V-3 Racer Motor Magnets for Viper V3™, BSRT G3-R and Tomy Super G Plus

Viper Part #: 11315 (code green)

One pair of magnets.  These are compression molded poly motor magnets.  Specifically made to fit Viper V-3, V1, BSRT G3-R and Tomy Super G Plus cars.  These magnets are optimized for the V-3 Spec Racer cars running 6-ohm class armatures.   

ALL New Viper SR (SPEC Racer) Motor Magnets are designed for increased RPMs and smoother power delivery over standard Pro 4 magnets.  When utilized with the V-3 Maxi SR Block Style traction magnets, total downforce when measured with a White Dog meter is greater than an all-traditional magnet level 4 car. Car setup and driving style will be a bit different that the traditional magnet design setups. 

All magnet batches are precisely controlled and consistent. 

• Increased tip length (Higher RPMS) 
• High Precision molding

HOPRA Approved Parts

Spec Racer Motor Magnets for Viper V-3 and V1, BSRT G3-R and Tomy Super G Plus

Viper Part #: 22816 (code orange)

One pair of magnets.  These are compression molded poly motor magnets.  Specifically made to fit Viper V-3 and V1, BSRT G3-R and Tomy Super G Plus cars.  These magnets are optimized for the Spec Racer class cars running 6-ohm class armatures.  

ALL New Viper SPEC Racer Motor Magnets are designed for increased RPMs and smoother power delivery over standard Pro 4 magnets.  When utilized with the Maxi Pro-4 Wing-Style traction magnets in V1, total downforce when measured with a White Dog meter is greater than an all-traditional magnet level 4 car. Car setup and driving style will be a bit different that the traditional magnet design setups. 

All magnet batches are precisely controlled and consistent. 

• Increased tip length (Higher RPMS) 
• High Precision molding

 HOPRA Approved Parts

Viper Aluminum Body Posts for Viper V-1,  BSRT G-3, Super 7 & Tomy A/FX Super G Plus

You get 1 set of 4 posts. They are a direct screw-in fit for Viper V-3, Super 7,  BSRT G3 and G3-R cars. 

They can be fitted to Tomy Super G Plus and other brands of HO slot cars with properly located and drilled chassis.  

Engineered and made from the best materials available.  

Chassis in photos for example only, not included.  BSRT G3 is left rear, Tomy SG+ is right rear, Tyco 440 Narrow in front.

Viper Low Friction Pro-Grade Guide Pin

You get ONE guide pin. They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This professional grade guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .155 deep.  Engineered and made from the best materials available.

Viper Offset Trailing Guide Pin

You get ONE guide pin. They fit Viper, BSRT, Super 7, and most other Tomy Turbo, SRT, Super G Plus style cars. 

The all new CNC machined offset trailing guide pin allows you to position your guide pin as far back as possible. With the guide pin behind the front wheels it helps the car rotate quicker in the corners which reduces lap time and makes the car feel more comfortable (Less crashing) If you are looking for that slight edge on the competition this is it ! ! !

Engineered and made from the best materials available - Heat Treated. 

Note: you may need to set the pin with CA glue after installation. Use a drop of  glue on a tootpick or similar to wick the glue into the guide pin cavity. 

Viper Scale Racing V1 Firm Chassis

One firm chassis with timing bracket, and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts.

Firm chassis great for any magnets level 10 to level 25.  Great chassis for level 4 Drag Racing car.  

Optional installation of the endbell tension ring allows racers to load the amount of tension between the endbell and the timing bracket.  Some guys like it loose, some like it tight... .

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Firm Chassis

Post-less for Hard Body

One firm chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others.  

Firm chassis for running all level 10 magnets and stronger up to level 25.  Good for level 4 Drag Racing chassis.

Lexan body post removed for running Hard Body clips. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Firm Chassis Bulkhead Timing Bracket

One firm chassis timing bracket. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Firm Chassis Kit

One firm chassis with timing bracket, magnet clip, endbell ring, rear axle retaining pins, guide pin, and independent front axle set.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts.

Firm chassis great for any magnets above Level 10 to Level 25.  Good for Level 4 Drag Racing. 

Optional installation of the endbell tension ring allows racers to load the amount of tension between the endbell and the timing bracket. 

Viper guide pin installed, Independent front axle set installed with .340 tires.  Front axle is a drill blank.

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Firm Chassis Magnet Clip

One firm chassis magnet clip. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Flexible Chassis

One flexible chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts. 

Flexible chassis designed for ceramic class and weighted class cars.  Level 4 may be indicated for some track applications. Not recommended for Level 10 or higher magnets. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Flexible Chassis

Post-less for Hard Body

One flexible chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others.  

Flexible chassis designed for ceramic class and weighted class cars.  Level 4 may be indicated for some track applications. Not recommended for Level 10 or higher magnets. 

Lexan body post removed for running Hard Body clips. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Flexible Chassis Bulkhead Timing Bracket

One flexible chassis timing bracket. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Medium Chassis

Founders' Limited Edtion

Founder's Limited Edition HO Slot Car. Chassis.  It's been 10 years since Viper released it's V-1 Chassis. The original production run of chassis had and open, through feature for the logo on the rear of the chassis.  Later production runs changed the rear logo to a releif feature.  These limited amount of original chassis are from the 'hoarder's bunker' inventory.  

One medium chassis with timing bracket, magnet clip, and endbell tension ring.  Designed to be the ultimate version of the Tomy Super G Plus.

Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts. 

Medium chassis designed for ceramic, Level 4, Level 10, and some polymer builds.  HOPRA Approved Part. 

Viper Scale Racing V1 Medium Chassis

One medium chassis with timing bracket, magnet clip, and endbell tension ring.  Designed to be the ultimate version of the Tomy Super G Plus.

Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts. 

Medium chassis designed for ceramic, Level 4, Level 10, and some polymer builds. 

Optional installation of the endbell tension ring allows racers to load the amount of tension between the endbell and the timing bracket.  Some guys like it loose, some like it tight... .

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Medium Chassis

Post-less for Hard Body

One medium chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others.  

Lexan body post removed for running Hard Body clips. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Medium Chassis Bulkhead Timing Bracket

One medium chassis timing bracket. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Medium Chassis Kit

One medium chassis with timing bracket, magnet clip, endbell ring, rear axle retaining pins, guide pin, and independent front axle set.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts.

Medium chassis great for magnet classes from Pro Ceramic Super Stock to CMPM Level 10.  Do NOT use cobalt or neo magnets in medium chassis. 

Optional installation of the endbell tension ring allows racers to load the amount of tension between the endbell and the timing bracket. 

Viper guide pin installed, Independent front axle set installed with .340 tires.  Front axle is a drill blank.

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Medium Chassis Magnet Clip

One medium chassis magnet clip. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Stiff Chassis

Post-less for Hard Body

One stiff chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others.  

Stiff chassis for running all level 25 magnets and stronger up to neo 52. 

Lexan body post removed for running Hard Body clips. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Stiff Chassis Bulkhead Timing Bracket

One stiff chassis timing bracket. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Stiff Chassis Kit

One stiff chassis with timing bracket, magnet clip, endbell ring, rear axle retaining pins, guide pin, and independent front axle set.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts.

Stiff chassis great for any magnets above Level 10.  Perfect chassis for "Drop-In" neo car builds.  

Optional installation of the endbell tension ring allows racers to load the amount of tension between the endbell and the timing bracket. 

Viper guide pin installed, Independent front axle set installed with .340 tires.  Front axle is a drill blank.

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

Viper Scale Racing V1 Stiff Chassis Magnet Clip

One stiff chassis magnet clip. Can be used as a direct replacement part or with different chassis stiffness to to create different handling characteristics. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)