Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original.

Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

HCS AMG Pro-Trax™ Rear Axle Set with 23T Super Tough Crown Gear

You get one (1) rear axle set:  HCS 23T Super Tough Crown Gear and T-Boss on HCS stainless steel axle.  These can be run in Tomy Mega-G and Mega-G+ cars.   

Axle set can be utilized in many modern HO slot cars with appropriate rear rims and tires.  This axle is the standard axle used on HCS built Bulldog and Super 7 Drad Racing chassis. 

Crown will mesh with HCS AMG black and orange 7T pinion gears as well as Viper, BSRT, and Tomy 7T pinion gears. 

T-Boss will need to be pulled out some if 8T pinion gears are used.  

HCS AMG Ceramic Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

TWO pairs of magnets.  These are the real deal ferrite Ceramc motor magnets. Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  Equal or better in every measure to the late model factory Tomy parts. These magnets are very consistent for size and strength.  No more sorting piles of old Tomy Super G+ motor magnets to find a set that fits propertly for you Viper V-1 and BSRT G-3R cars. 

Harden Creek Slot Cars - Low Profile Pickup Shoes - 10 Sets

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 3 Sets

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 5 Sets

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 10 Sets - Silver Plated

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Silver Plated
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 3 Sets - Silver Plated

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Silver Plated
• Faster Lap Times
• Better Handling

Harden Creek Slot Cars - Low Profile Pickup Shoes - 5 Sets - Silver Plated

The HCS AMG Low Profile pickup shoes feature a high contact, long lasting profile. The low profile shoe was designed with the racer in mind. Made from the highest rated copper alloy for electrical contact applications. 

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can be used on Super 7 GTS, Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars that are running front tires at .340" OD or smaller.  This generally involves cars being fitted with o-ring or independent front axle sets where tire sizes can be specified.  

• Low Profile
• High Contact Surface
• Long Lasting
• Silver Plated
• Faster Lap Times
• Better Handling

HCS AMG Pro Recessed Pickup Shoe Hangers - 10 Sets - Silver Plated 

The HCS AMG Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Silver Plated
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 3 Sets - Silver Plated 

The HCS AMG Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Silver Plated
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 5 Sets - Silver Plated 

The HCS AMG Silver Plated Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Silver Plated
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 10 Sets

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 3 Sets

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Lighter
• Faster
• Easy to install

HCS AMG Pro Recessed Pickup Shoe Hangers - 5 Sets

The HCS AMG Recessed Hangers feature a lightweight low profile design. The most important part of the hangers is the recessed hinge point for the pickup shoe and the forward bend of the hanger window.

This recess prevents the hanger from contacting the rail and allows the pickup shoe to completely contact the rail. This is important because not allowing the pickup shoe to contact the rail can result in power loss and unwanted heat. No bending is required. Just install and go. 

The forward factory bend of the hanger window helps keep the heal hook of the pickup shoe from popping out of the window during rough handing and crashes.  This design feature is and industry first and not found on any other brand of shoe hanger.

Hangers are heat treated for increased shape retention. 

The other key feature that has been added to this hanger is the dimple in the top of the spring tab. This allows racers to add a solder point for lights or shunt wires.

• Recessed Hinge Point
• Forward Bend of Hanger Window 
• Heat Treated 
• Solder Dimple
• Lighter
• Faster
• Easy to install

You get 1 pairs of tires.  Perfect replacement for lost or damaged front tires.  

Size is .384" as measured mounted on the stock HCS .275" front rim.  

Chassis for display and NOT included.  

HCS AMG Black Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars. 

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .285" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Yellow CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Blue CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Red CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axles and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets White CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Black CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Delrin Front and Rear Hub Sets with Tires

You get 1 sets of narrow style injection molded Delrin front & rear hubs with tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the  tires.  Rear hubs are .285" OD and measure .448" with the tires. 

These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Standard Grade Guide Pins

3 Each . They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  These guide pins are standard grade made from high quality stainless stee. 

Full-Height Pro-10^™ Traction Magnets for  HCS AMG Super 7
 

One pair of magnets.  These are the real deal Level 10 grade compression molded full-width full-height magnets.  Specifically made to fit HCS AMG Super 7 cars.  It is recommend that you run slip-on tires of an OD at .450" or so on quality aftermarket hubs to provide enough track clearance so the armature does not overheat.  

Full-Height Pro-6^™ Traction Magnets for  HCS AMG Super 7
 

One pair of magnets.  These are the real deal Level 6 grade compression molded full-width full-height magnets.  Specifically made to fit HCS AMG Super 7 cars.  It is recommend that you run medium compound slip-on tires of an OD at .432" or so on quality aftermarket hubs.

HCS AMG Super 7 -  Super 7 GTS 6 Ohm RTR Hardbody Slot Car

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 7/23 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly. Front and rear hubs are CNC made.  All cars are track tested. 

Car is set up to run best on custom routed tracks such as those from Viper Scale Racing or Wizzard.  Tire sizes may be too low for Tomy or Auto World factory track systems.

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS 6 Ohm RTR Hardbody Slot Car - Blue

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 7/23 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly. Front and rear hubs are CNC made.  All cars are track tested. 

Car is set up to run best on custom routed tracks such as those from Viper Scale Racing or Wizzard.  Tire sizes may be too low for Tomy or Auto World factory track systems.

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

Chassis is injection molded in pigmented white. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS 6 Ohm RTR Hardbody Slot Car - Red

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 7/23 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly. Front and rear hubs are CNC made.  All cars are track tested. 

Car is set up to run best on custom routed tracks such as those from Viper Scale Racing or Wizzard.  Tire sizes may be too low for Tomy or Auto World factory track systems.

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

Chassis is injection molded in pigmented white. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS 6 Ohm RTR Hardbody Slot Car - White

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 7/23 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly. Front and rear hubs are CNC made.  All cars are track tested. 

Car is set up to run best on custom routed tracks such as those from Viper Scale Racing or Wizzard.  Tire sizes may be too low for Tomy or Auto World factory track systems.

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

Chassis is injection molded in pigmented white. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS 6 Ohm RTR Hardbody Slot Car - Yellow

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 7/23 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly. Front and rear hubs are CNC made.  All cars are track tested. 

Car is set up to run best on custom routed tracks such as those from Viper Scale Racing or Wizzard.  Tire sizes may be too low for Tomy or Auto World factory track systems.

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

Chassis is injection molded in pigmented white. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car

HCS AMG Super 7 chassis and parts include: front axle set, pickup shoes, shoe hangers and springs, Pro-10 poly traction magnets, 7/23 gears, single flanged rear hubs, slip-on rear tires.

6 ohm red wire HCS AMG Super 7 motor assembly.  Front and rear hubs are injection molded.  All cars are track tested. 

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car with All Clips

HCS AMG Super 7 chassis and parts include: front axle set, pickup shoes, shoe hangers and springs, Pro-10 poly traction magnets, 7/23 gears, single flanged rear hubs, slip-on rear tires.

6 ohm red wire HCS AMG Super 7 motor assembly.  Front and rear hubs are injection molded. All cars are track tested. 

Includes one each hard body clip: Tomy, Low Rider Tomy, Life Like, Tyco Wide-Pan.

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car - Blue

HCS AMG Super 7 chassis and parts include: front axle set, pickup shoes, shoe hangers and springs, Pro-10 poly traction magnets, 7/23 gears, single flanged rear hubs, slip-on rear tires.

6 ohm red wire HCS AMG Super 7 motor assembly.  Front and rear hubs are injection molded.  All cars are track tested. 

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars. 

NOTE:  Chassis blue color is a little darker than the photo.  

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car - HOPRA Box Stock

HCS AMG Super 7 chassis set up for HOPRA Box Stock racing.  Parts include: standard SC front axle set, long travel ski style pickup shoes, pro shoe hangers and springs, Pro-6 poly traction magnets, 7/23 gears, double flanged CNC rear hubs, .424 Viper firm Albino slip-on rear tires.  6 ohm red wire HCS AMG Super 7 motor assembly.  All cars are track tested. 

You will need to purchase a clip to run whatever hard bodies you like.  

Cars start life as a standard SC model with level 10 traction magnets.  During track testing of a build lot, a few cars will exhibit superior handling and speed.  These cars are marked for upgrading to the HOPRA Box Stock formula.  The level 10 traction magnets are exchanged for level 6.  The rear axle set is changed to one with CNC double flanged hubs.  The firm Viper Albino tires are fitted for superior speed.  

NOTE:  Chassis color is NOT an option.  You will recieve the next chassis off the inventory stack.  You get one ready to run slot car. 

Limit one car per order so other racers have the opportunity to get one. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car - Red

HCS AMG Super 7 chassis and parts include: front axle set, pickup shoes, shoe hangers and springs, Pro-10 poly traction magnets, 7/23 gears, single flanged rear hubs, slip-on rear tires.

6 ohm red wire HCS AMG Super 7 motor assembly.  Front and rear hubs are injection molded.  All cars are track tested. 

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars. 

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car - White

HCS AMG Super 7 chassis and parts include: front axle set, pickup shoes, shoe hangers and springs, Pro-10 poly traction magnets, 7/23 gears, single flanged rear hubs, slip-on rear tires.

6 ohm red wire HCS AMG Super 7 motor assembly.  Front and rear hubs are injection molded.  All cars are track tested. 

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 SC 6 Ohm RTR Hardbody Slot Car - Yellow

HCS AMG Super 7 chassis and parts include: front axle set, pickup shoes, shoe hangers and springs, Pro-10 poly traction magnets, 7/23 gears, single flanged rear hubs, slip-on rear tires.

6 ohm red wire HCS AMG Super 7 motor assembly.  Front and rear hubs are injection molded.  All cars are track tested. 

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level road racing, bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS-DRAG 6 Ohm RTR Hardbody Slot Car - Blue

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 8/21 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly.  Dyno tested.  Car us set up for drag racing on plastic or routed tracks.  

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS-DRAG 6 Ohm RTR Hardbody Slot Car - Red

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 8/21 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly.  Dyno tested.  Car us set up for drag racing on plastic or routed tracks.  

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS-DRAG 6 Ohm RTR Hardbody Slot Car - White

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 8/21 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly.  Dyno tested.  Car us set up for drag racing on plastic or routed tracks.  

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 -  Super 7 GTS-DRAG 6 Ohm RTR Hardbody Slot Car - Yellow

HCS AMG Super 7 chassis and parts include: O-Ring style front axle set, Double Flanged rear hubs, pickup shoes, shoe hangers and springs, Pro-6 poly traction magnets, 8/21 gears.

6 ohm red wire HCS AMG Super 7 Balanced motor assembly.  Dyno tested.  Car us set up for drag racing on plastic or routed tracks.  

You will need to purchase a clip to run whatever hard bodies you like.  

Great car for Hard Body club level bracket drag racing and STLP drag dacing. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HCS AMG Super 7 Standard Chassis

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium chassis with magnet clip.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

Additional photos show the various clips that can be utilized as well as the installation of aluminum lexan body posts. 

Clips and posts are NOT included and are only for refereance.

HCS AMG Super 7 Standard Chassis - Blue

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - IROC Set

You get one each chassis - Red, White, Blue, Yellow. HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - Red

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - White

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - Yellow

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

Pro-10™ Traction Magnet Bar for Tomy Turbo and Bulldog racing BDR Cars

One magnet bar.  These are Level 10 traction magnet bars specifically made to fit Tomy Turbo and Bulldog Racing BDR cars.  A great upgrade from the weak factyory ceramic traction magnet bar on a Tomy Turbo.    Add a set of quality after-market slip-on tires and Turbo can be fun to run !!!

Neo Traction Magnet Holders for Tomy Turbo, SRT and Bulldog Racing BDR Cars

Three magnet holders.  These are traction magnet holders specifically made to fit Tomy Turbo, SRT and Bulldog Racing BDR cars.  

A great upgrade from a Tomy Turbo - turns it into an SRT.   Use original Tomy SRT magnets or the Pro-35 Neo magnets for BDR cars.  

Magnets and car not included - for displae only. 

NOTE: Magnet for Tomy Mega-G or Mega-G + are too small to work in these parts. 

 Life Like Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Life Like hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Life Like bodies onto  HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Tyco 440x2 Wide-Pan Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Tyco 440x2 Wide-Pan hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Tyco 440x2 Wide-Pan bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Viper Scale Racing .008 Pro Pickup Shoe Springs - 4 Sets

VSR .008" Pro pickup springs are precision wound to deliver the highest quality of consistency.

The consitency translates into a better handling and more predictable car.

These springs fit the Viper V1, BSRT G3, and Tomy Super G Plus cars.

Viper Scale Racing "Gen-4" Motorbrush Endbell Assembly

All new VSR "Gen-4" endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The Viper "Gen-4"endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Viper Pro Style machined bronze bushing installed as standard.

Note: you do NOT have to use the plastic tensioning ring wtih this new designed part. 

This is a great stock replacement part or even a upgrade over stock.

1. Premium Pro Style bronze bushing now standard
2. Premium brush material composition optimized for best electrical conductivity
3. Brush size optimized for maximum contact patch on the armature commutator plates
4. Innovative endbell front contact plates – “Bunny Ears” – developed by Viper remain the standard
5. Industry first ‘Spring Plates’ allow the easy installation of motor brush arm helper springs for high amp draw applications
6. Endbell to bulkhead lock-in features are doubled for maximum retention of endbell timing positions

Photos show installation of brush arm helper springs. These springs are usually pickup shoe springs for Aurora AFX and Magna-Tration style cars.  Springs NOT included.

Viper Scale Racing "Gen-4" Motorbrush Endbell Assembly - 10 Each

All new VSR "Gen-4" endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The Viper "Gen-4"endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Viper Pro Style machined bronze bushing installed as standard.

Note: you do NOT have to use the plastic tensioning ring wtih this new designed part. 

This is a great stock replacement part or even a upgrade over stock.

1. Premium Pro Style bronze bushing now standard
2. Premium brush material composition optimized for best electrical conductivity
3. Brush size optimized for maximum contact patch on the armature commutator plates
4. Innovative endbell front contact plates – “Bunny Ears” – developed by Viper remain the standard
5. Industry first ‘Spring Plates’ allow the easy installation of motor brush arm helper springs for high amp draw applications
6. Endbell to bulkhead lock-in features are doubled for maximum retention of endbell timing positions

Photos show installation of brush arm helper springs. These springs are usually pickup shoe springs for Aurora AFX and Magna-Tration style cars.  Springs NOT included.

Viper Scale Racing "Gen-4" Motorbrush Endbell Assembly - 3 Each

All new VSR "Gen-4" endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The Viper "Gen-4"endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Viper Pro Style machined bronze bushing installed as standard.

Note: you do NOT have to use the plastic tensioning ring wtih this new designed part. 

This is a great stock replacement part or even a upgrade over stock.

1. Premium Pro Style bronze bushing now standard
2. Premium brush material composition optimized for best electrical conductivity
3. Brush size optimized for maximum contact patch on the armature commutator plates
4. Innovative endbell front contact plates – “Bunny Ears” – developed by Viper remain the standard
5. Industry first ‘Spring Plates’ allow the easy installation of motor brush arm helper springs for high amp draw applications
6. Endbell to bulkhead lock-in features are doubled for maximum retention of endbell timing positions

Photos show installation of brush arm helper springs. These springs are usually pickup shoe springs for Aurora AFX and Magna-Tration style cars.  Springs NOT included.

Viper Scale Racing "Gen-4" Motorbrush Endbell Assembly - 5 Each

All new VSR "Gen-4" endbell for V1, Super G+ and BSRT G cars. This is a stock replacement for those nearly extinct Mabuchi endbells from Tomy Super G Plus cars that have been out of production for years.

The Viper "Gen-4"endbell comes with arched contact points which improve reliability over the stock Mabuchi SG+ 'bunny ears'.   Viper Pro Style machined bronze bushing installed as standard.

Note: you do NOT have to use the plastic tensioning ring wtih this new designed part. 

This is a great stock replacement part or even a upgrade over stock.

1. Premium Pro Style bronze bushing now standard
2. Premium brush material composition optimized for best electrical conductivity
3. Brush size optimized for maximum contact patch on the armature commutator plates
4. Innovative endbell front contact plates – “Bunny Ears” – developed by Viper remain the standard
5. Industry first ‘Spring Plates’ allow the easy installation of motor brush arm helper springs for high amp draw applications
6. Endbell to bulkhead lock-in features are doubled for maximum retention of endbell timing positions

Photos show installation of brush arm helper springs. These springs are usually pickup shoe springs for Aurora AFX and Magna-Tration style cars.  Springs NOT included.

Viper Scale Racing Low Profile Pickup Shoes - 1 Set

The Viper Scale Racing Low Profile pickup shoes feature a lightweight high contact, long lasting profile. The low profile shoe was designed with the racer in mind.

These shoes are recommended to use for Super Stock racing or any other class that would require you to use front tires smaller than .340” The low profile design pulls the heel of the shoe up and keeps the shoe flatter when using small front tires.

This shoe can also be used on Tomy Super G+, SRT, Turbo, Viper V1 and BSRT G cars.

• Lightweight Design
• Low Profile
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Scale Racing Motorbrush Endbell Key

All new VSR endbell key for V1, Super 7,. Super G+ and BSRT G cars. You get one new VSR endbell key for V1, Super G+ and BSRT G cars.   

A must-have tool to properly spread the motorbrush arms inside the endbell so that they do not get damaged installing or removing the armature

Black Diamond™ Pro-10™ Traction Magnets 1/2 Height for Tomy Super G Plus
One pair of magnets.  These are the real deal Level 10 grade compression molded full-width magnets.  Specifically made to fit Tomy Super G Plus cars.  It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub. 15% stronger than factory SGP traction magnets. 

 These will also fit a Viper V1™, BSRT Scale Auto G3 and G3-R chassis with a top shim.  Magnets have the "R" notch. 

Pro-10^TM Poly Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus
 

One pair of magnets.  These are the real deal Level 10 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™,  BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved for the level 10 poly mod class. 

Pro-4^™ Poly 'Ceramic Grade' Motor Magnets for Viper V1™,  BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are the real deal Level 4 grade compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets can be substituted in application for ceramic motor magnets.  Equal or better in every measure to the factory part.  HOPRA Approved of level 4 cars. 

Spec Racer Motor Magnets for Viper V1™, BSRT G3-R and Tomy Super G Plus

One pair of magnets.  These are compression molded poly motor magnets.  Specifically made to fit Viper V1™, BSRT G3-R and Tomy Super G Plus cars.  These magnets are optimized for the Spec Racer class cars running 6-ohm class armatures.  HOPRA Approved for Spec Racer class cars.  

ALL New Viper Pro 4™ SR (SPEC Racer) Motor Magnets are designed for increased RPMs and smoother power delivery over standard Pro 4 magnets.  When utilized with the Maxi Pro-4 Wing-Style traction magnets, total downforce when measured with a White Dog meter is greater than an all-traditional magnet level 4 car. Car setup and driving style will be a bit different that the traditional magnet design setups. 

All magnet batches are precisely controlled and consistent. 

• Increased tip length (Higher RPMS) 
• High Precision molding

Viper Scale Racing Standard Profile Pickup Shoes - 1 Set

The Viper Scale Racing standard pickup shoes feature a lightweight high contact, long lasting profile. This shoe is a great performance upgrade for the Tomy Super G+, SRT and Turbo.

The shoe is a direct factory replacement and requires no modifications. The Standard shoe is used on all Viper V1 Box stock cars and can be used on Tomy Super G+, Tomy Turbo, Tomy SRT, Viper V1 and BSRT G cars

• Lightweight Design
• Long High Contact Surface
• Long Lasting
• Faster Lap Times
• Better Handling

Viper Aluminum Body Posts for Viper V-1,  BSRT G-3, Super 7 & Tomy A/FX Super G Plus

You get 1 set of 4 posts. They are a direct screw-in fit for Viper V-3, Super 7,  BSRT G3 and G3-R cars. 

They can be fitted to Tomy Super G Plus and other brands of HO slot cars with properly located and drilled chassis.  

Engineered and made from the best materials available.  

Chassis in photos for example only, not included.  BSRT G3 is left rear, Tomy SG+ is right rear, Tyco 440 Narrow in front.

Viper Low Friction Pro-Grade Guide Pin

You get ONE guide pin. They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  This professional grade guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to side.

Viper Low Friction Pin is .155 deep.  Engineered and made from the best materials available.

Vper O-Ring Front End Set for Viper V1,  Super 7 GTS, BSRT G3, Tomy SG+

You get one (1) complete axle set: Hubs, O-Rings, Axle.  Get your ride slammed for best handling!!   These are the real-deal CNC machined Delrin front 'o-ring' hubs and axle sets.  .

These are designed to run in Viper V1, Super 7 GTS, BSRT G3-R and Tomy Super G Plus.  Other applications can be done with different size o-rings installed.  Comes with 1 sets of .340 o-rings to get your car 'slammed'!!

Sets shipped with hubs pressed on loose.  You may need press or other proper tools to get and exact fit to your specific car.  Chassis NOT included - for display only.