Specials

HCS AMG 6 Ohm Econo Dynamically Balanced Stock Armature for Tomy Mega-G & JAG TR-3

HCS AMG 6 Ohm Econo Dynamically Balanced Pro Stock Armature

These stock stock armatures are machine dynamically balanced.  These arms average 6.10 ohms.  The hot stock armature can be used in the older Tomy Mega-G and the new JAG TR-3 cars. Great bang for your buck.

NOTE: Does not work in Wizzard Fusion car.

  • Stock 6 ohm class armature
  • Machine Dynamically Balanced - no gluing or epoxy
  • Drop in replacement for Mega-G and JAG TR-3 cars
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$9.95
HCS AMG Tomy Style .008 Pick-Up Shoe Springs for Turbo, SRT, & Super G Plus - 5 Sets
New Tomy Style Standard Pick-Up Shoe Springs
 for Turbo, SRT, and Super G Plus

5 Pairs of .008 pickup shoe springs.  Can be used in Viper V-1 and BSRT G3-R cars.
 
New run of reproduection springs.   
 


 

$3.75
HCS AMG Tomy Style Pick-Up Shoes for Turbo, SRT, & Super G Plus - 3 Sets
New Tomy Style Standard Pick-Up Shoes 
 for Turbo, SRT, and Super G Plus

3 Pairs of shoes.  New run of reproduection shoes.   
 


 

$3.95
Tyco 440x2 & HPx2 Pick-Up Shoes - 3 Sets
New Tyco 440x2 & HPx2 Standard Pick-Up Shoes 
 

3 Pairs of shoes.  Equal to or better than original factory parts.  
Built car for example only - not included.


 

$3.95
Tyco 440x2 - AMG Ceramic Traction Magnets - Lot of 10 Sets

HCS AMG Ceramic Traction Magnets for Tyco 440x2 Chassis

TEN pairs of  magnets.  North / South oriented so they can be installed in either high downforce or low downforce (motor mode).  These are 'drop-in' for any Tyco 440x2 chassis or Mattel HPx2. 

Note: ceramic magnets are not as strong as level 4 compression molded magnets.  These are good 'all ceramic' magnet classes.  Also they work well when running proper sized silicone sponge rear tires.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

 

$19.95
Viper - 2.8 Ohm HOT High Speed Armature for Viper V1, BSRT G3, & Tomy SG+

Viper 2.8 ohm High Speed Armature

All new Viper High Speed modified armature. This is a high horsepower production armature for road racing applications with Pro-10™ traction magnets and PST slipon tires.  Makes a good drag motor too.  The High Speed armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck. If you want to be king of the hill on your home track then this is the armature for you. 

  • High Speed 2.8 ohm
  • Looks Stock
  • Drop in replacement for SG+, V1, BSRT G cars
  • Low cost
  • FAST FAST FAST

 


 

Was: $7.95
Now: $5.49
Viper - 6 Ohm Stock Armature for Viper V1, BSRT G3, & Tomy SG+

Viper Scale Racing 6 ohm Stock Armature

All new Viper stock armature. This is a standard production armature for road racing applications with Pro-4™ traction magnets and PST slipon tires.  Can be run with Pro-10 traction magnets with hard slip-on tires.  These arms average 6.10 ohms.  The stock armature can be used in the Viper V1, BSRT G cars and also the Tomy Super G+. Great bang for your buck.

  • Stock 6.00 ohm class armature
  • Drop in replacement for SG+, V1, BSRT G cars
  • Low cost
  • Narrow gap, red wire, folded tab design meets HOPRA specifications

 


 

$5.95
Viper Scale Racing V1 Pro Racing Flexible Chassis - HOPRA Approved

Viper Scale Racing V1 Flexible Chassis

One flexible chassis with timing bracket and magnet clip.  Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts. 

Flexible chassis designed for ceramic class and weighted class cars.  Level 4 may be indicated for some track applications. Not recommended for Level 10 or higher magnets. 

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

$11.95
Viper Scale Racing V1 Pro Racing Medium Chassis - HOPRA Approved

Viper Scale Racing V1 Medium Chassis

One medium chassis with timing bracket, magnet clip, and endbell tension ring.  Designed to be the ultimate version of the Tomy Super G Plus.

Chassis will accept parts from Tomy Super G Plus, Viper Scale Racing, BSRT, and others. Molded in lexan body posts. 

Medium chassis designed for ceramic, Level 4, Level 10, and some polymer builds. 

Optional installation of the endbell tension ring allows racers to load the amount of tension between the endbell and the timing bracket.  Some guys like it loose, some like it tight... .

HOPRA Approved Part. 

The Next Generation of HO Racing™ is here.  Own a piece of it ;-)

$9.95
Wizzard Storm - Pro-10™ Wizzard Storm Motor Magnets

Pro-10™ Compression Molded Motor Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 10 compression molded motor magnets specifically made to fit Wizzard Storm cars and black epoxy coated.  These are sold as a hop-up part for Stock Storm cars or as for running the HOPRA P10 Class.     

A good starting point for a build formula is a stiff Strom chassis, 3 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 


 

Was: $11.95
Now: $5.95
Wizzard Storm - Pro-10™ Wizzard Storm Traction Magnets - HOPRA Approved

Pro-10™ Compression Molded Traction Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 10 compression molded traction magnets specifically made to fit Wizzard Storm cars and black epoxy coated.  These are sold as a hop-up part for Stock Storm cars or as for running the HOPRA P10 Class.     

A good starting point for a build formula is a stiff Strom chassis, 3 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 

The magnets are north/south oriented so they can be run in either high or low downforce. HOPRA approved for the Level 10 Poly Mod class. 
 

Was: $7.95
Now: $3.95
Wizzard Storm - Pro-4™ Wizzard Storm Motor Magnets

Pro-4™ Compression Molded Motor Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 4 compression molded motor magnets specifically made to fit Wizzard Storm cars and black epoxy coated.  These are sold as a hop-up part for Stock Storm cars.     

A good starting point for a build formula is a standard Strom chassis, 6 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 


 

Was: $9.95
Now: $4.95
Wizzard Storm - Pro-4™ Wizzard Storm Traction Magnets

Pro-4™ Compression Molded Traction Magnets for Wizzard Storm

One pair of magnets.  These are the real deal Level 4 compression molded traction magnets specifically made to fit Wizzard Storm cars. These are sold as a hop-up part for Stock Storm cars.     

A good starting point for a build formula is a standard Strom chassis, 6 ohm armature, quality front axle set, quality rear hubs and firm tires, and a quality 7/23 gear set. 

The magnets are north/south oriented so they can be run in either high or low downforce.  
 

Was: $5.95
Now: $2.95
Wizzard Storm Ceramic Motor Magnets

Wizzard Storm Ceramic Motor Magnets - 10 Pairs

10 pair of magnets.  These are the real deal, new, never run, ceramic Wizzard Storm Motor Magnets from the original supplier.  

 
 

$19.99